That’s it. I’d like a jig to make 30 Herrett brass. Might make 300 blackout someday too.
Printable View
That’s it. I’d like a jig to make 30 Herrett brass. Might make 300 blackout someday too.
Check ebay, there's a few sources on there for the jigs. Since I didn't plan on making a pile of 30 herrett, I just placed a piece of tape on the chop saw base where I needed to place the case head and used the vise.
reloading 3D (found on their webpage or ebay)
i just got 2 jigs today, they are the 30 Herrett and the 357 Herrett jigs. they are great with a Harbor Frieght mini chop saw.
Bought mine off ebay also.
Well, I ended up buying this one: LINK
That looks like mine. Will work good.
I use the 30-30 based jig the 300 BO jig and one other generic jig for many more than intended cutting jobs, If you can find them the Aluminum jigs can be slightly scored with reference mark, A bit or friction tape to adjust the jig to hold the unintended case square to the blade works great, And also stops the jigs from moving during large cutting jobs, The clamps on the saws are really not great but with the friction tape on the surface work well enough.