Need help finding aftermarket barrel nut

I have searched the "search forum" and cannot find the particular barrel nut I remember seeing on here last year. Someone shared about a barrel nut that can be loosened and tightened with a box end wrench. I'm pretty sure it was a stainless nut, but finish is not important to me.
Does this sound familiar to anyone? If you can share the name/company or the link I would greatly appreciate it. I would like to change out my round barrel nut that now has pipe wrench marks on it.

If you have any other barrel nut recommendations that might be user friendly, feel free to share. Thanks.

https://patriotvalleyarms.com/barrel...emage-barrels/

Quote:

---

Originally Posted by celltech

https://patriotvalleyarms.com/barrel...emage-barrels/

---

That's the one. Thanks for such a quick response.

How do you measure the recommended torque with a crescent wrench?

Attachment 7399
Make sure to reduce the desired torque reading by the difference in length ratio (same as using the barrel nut wrench) ie; add 12 to the distance from barrel nut center to square drive center. Now divide 12 by that sum. Now multiply that quotient by your desired torque. The result will be the torque you should use.
Example: step 1. 12+3=15
step 2. 12÷15= .8
step 3. 45 ft/lbs. × .8 = 36

Side note: I have a PVA nut and it is nice. Tolerances in mine are good and the tighter fit than Savage nuts will help you find the slightest imperfection in your barrel threads.

I just looked again. Recommended is 45-65 ft pounds. One could probably skip the math and hit that window! On a side note thank you for your example. I've heard of that before but always forget to look it up and save it.

Yes, skip the math. Actually, using a Crow’s foot on a torque wrench it is easy to get an exacting torque. Simply turn the Crow’s foot 90 degrees to the Right Angle position. Doing this eliminates any mechanical advantage extra length would have.

Quote:

---

Originally Posted by Dave Hoback

Yes, skip the math. Actually, using a Crow’s foot on a torque wrench it is easy to get an exacting torque. Simply turn the Crow’s foot 90 degrees to the Right Angle position. Doing this eliminates any mechanical advantage extra length would have.

---

I don't know if this is true but this is what I do. I go 90 ft/lbs. Very happy with the accuracy at that torque weight.

Quote:

---

Originally Posted by Robinhood

I don't know if this is true but this is what I do. I go 90 ft/lbs. Very happy with the accuracy at that torque weight.

---

Thanks everyone for all of your help on the barrel nut and the torque specs. I ordered the nut from PatriotValleyArms.

Update. The new barrel nut came in and now it’s installed. I love the design and can use a standard wrench on it. I got the stainless steel version, and it looks great next to the blued action and barrel.


Sent from my iPhone using Tapatalk

Post up a picture sir. I'd like to see it.

Can see here - https://patriotvalleyarms.com/barrel...emage-barrels/

Quote:

---

Yes, skip the math.

---

For sure! Gotta remember. There are three kinds of people. Those who are good at math and those who are not.

https://uploads.tapatalk-cdn.com/202...be0913315b.jpg


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by wbm

For sure! Gotta remember. There are three kinds of people. Those who are good at math and those who are not.

---

HAHAHAHA! :biggrin-new::heh:

OP... I must say, that Stainless nut on a Black-out rifle is quite...”noticeable”, if nothing else. But if you enjoy the style, Kudos my friend!

Quote:

---

Originally Posted by Dave Hoback

HAHAHAHA! :biggrin-new::heh:

OP... I must say, that Stainless nut on a Black-out rifle is quite...”noticeable”, if nothing else. But if you enjoy the style, Kudos my friend!

---

Beauty is in the eye of the beholder!
I've got stainless nuts on matte barrels, gloss nuts on stainless barrels, stainless trigger guards on matte actions, and once in a while a matching combination. Savage builds are not any more functional with color coordination. Actually the color is insignificant and personally the mismatch he shows looks good imho, I think I've got one in the safe like his right now. It was stainless on stainless in another caliber a few weeks ago...let me check...there is often too many swaps going on in 7 or 8 different actions to remember them all.

Attachment 7497
Here's one...note the matte stainless guard too...��

You can tell from the color of our dining room chairs that we aren’t afraid of contrast. Ha! :-)


Sent from my iPhone using Tapatalk