-
Help with Identification
Good Morning,
I know this is probably a long shot, but I have to try. I need to identify the model of a shotgun that I only have some small parts for. The information that I have only identifies it as "Stevens Break top Single shot 12g" most of the parts are small screws and pins, but I do have the hammer. I have photos of it, which I have tried to link here, but I am not sure how it all works just yet. I will try to figure out how to post them today. I guess without them, you guys cant offer much help Ha!
https://photos.app.goo.gl/XaT6jt2Gu7yovozv7
-
You might be able to match them up with a schematic over at Numrich gun parts corp.
It looks a lot like this one from a Stevens model 100.
Good luck
https://www.gunpartscorp.com/products/971140A
-
I think you may be right! Thank you!
-
When looking for something else I came across this schematic of a model 96 that Numrich links to as parts for the model 100 and 101 as well if it helps you out any.
https://www.gunpartscorp.com/gun-man...tguns-sav/96-3
-
That looks a lot like the hammer in my J.C. Higgins 20 Ga. Model 101.40. Jeep's link is close to the one I used to get parts.