7 Attachment(s)
Rascal Mods for Competition?! Yep.
My daughter is in her first year of our 4H clubs shooting program and the rifle that fit her best was a left-handed Rascal. This girl is tiny! After one of our last competitions I was being asked a bunch of question about the rifle and what we had done to it. My daughter is consistently beating kids with much better guns, and is thrilled with her little underestimated Rascal. So here we go with mods so far....
We have drilled and tapped two points on the rear sight to get it ready for competition. We drilled the peep sight and tapped it to receive Lyman/Williams apertures, and we drilled the sight arm itself and tapped it for a 8-32 set screw 1/8" long. This allows us to make very small elevation changes needed for the targets she is shooting.
Attachment 6430 Attachment 6431
To help in the small changes needed we also made a washer to take the play out of the sight arm hinge screw and used some blue LocTite to get the right amount of resistance. This and the set screw have been so helpful.
Attachment 6432
We also did the obligatory removal of the front sight and replaced it with a Lyman 17a .404 height globe.
Attachment 6433
The inserts that come with the Lyman are...junk. Now that is my opinion, and it might not be shared with others. We found Lee Shavers inserts and following his advice stacked two inserts to create the sight picture my daughter likes. I cannot speak highly enough of these inserts. We love them!
Attachment 6434
So, how good can a little Rascal shoot? Now mind you, I cleaned up the barrel a bit and we were shooting good ammo, but it's not anything that is top secret or anything.
Target 1 from the last shoot
Attachment 6435
Target 2
Attachment 6436
Our next mod...we are working with Evolution Gun Works to make a mount that will accept the Williams Foolproof GR-TK rear sight. Prototype should be here any day now. This will allow her to make adjustments to her sight during the competitions which we are not able to do now. I'll keep y'all posted.
Hope this helps somebody out there. Andy
Just finished all these mods, but I'm shooting way high
This thread was an amazing resource as I've been working with my daughter and her Rascal as she enters 4H shooting. Thanks so much for sharing your hard work.
We're excited to start shooting, but we've hit a jam.
The first install was the Lyman MJT-20 (.700), which went well. I just finished installing the rear sight, Williams FP-GR-TK on the EGW adapter. While the install went well, the first trip to the range didn't. Shooting an NRA A17 target at 50', my shots were 2". That's at the max adjustment on the Williams.
I note that in the pictures here, the Williams is fairly close to the top of its adjustment range (meaning, when you look at the gauge on the sight, the top mark on the sight is just about at the index mark on the sight body). I have this rear sight as low it can go, but am still way high out of the black.
So, I've got a left-handed Rascal, an EGW mount, a Williams FP-GR-TK paired with a Lyman MJT-20 . . . it seems I'd match up perfectly with AndyVanday, but I'm getting different results. We'd sure appreciate any advice.