Re: ? on centerfeed actions
Probably just need to bend the feed lips out a bit so the shell sits a little higher.
Yes, just load them straight down
Re: ? on centerfeed actions
Wow, this just keeps getting better....
I was just looking at the crown. Not only is there a good ding on the muzzle, but it appeared that the crown was not cut true. Closer examination with a mic revealed that the bore is not centered in the barrel.
Guess I'll be calling Savage tomorrow....
Re: ? on centerfeed actions
I would send it back too.
Re: ? on centerfeed actions
i have a CF DBM Savage and yes to load the mag just push the round straight down. i've notice that usually when i try to chamber a round and the bolt won't pick it up is because the magazine is not fully seated.
Re: ? on centerfeed actions
11fcns,
Thanks for the reply, but my rifle does not have a DBM.
I'm more concerned about the barrel now. When I measured the barrel wall thickness there was .028 difference side to side. Savage received it on Monday with a note explaining both of the problems. Hopefully I hear from them soon or get it back with a new barrel and tweaked magazine lips.