Trigger identification?

Anyone can help ID this trigger on a Savage 111?

https://i.imgur.com/S3soIUk.jpg

https://i.imgur.com/7mEydfD.jpg

https://i.imgur.com/FkOtYuo.jpg

Timney

And this trigger will fit on this Savage 111?

https://i.imgur.com/1y8GkmD.jpg

https://i.imgur.com/x1B0QG8.jpg

Don't see why not...

I agree with Fred. It’s a Timney and there should be no problem installing on the other action.

Some information states the non-accutrigger model shown in the first picture will not fit the accutrigger models which I believe is the second pictures (no safety blade).

Without having them both in hand it is hard to know if the receivers are machined any different in the "safety" area.
My best guess is follow Sharpshooter's advice and try it. It won't take too long to try. If you are swapping both trigger for trigger you may have to drill the small spring tail hole in the non-accutrigget receiver.
My .02