Re: Model 10 Predator Bolt
Depending on age your rifle may not have the cocking indicator like his probably does. The cocking indicator, on newer models, pokes through the 1/4" hex hole in the BAS at the rear of the bolt. This could prevent an allen wrench from seating in the BAS unless the bolt is uncocked.
If his does have the cocking indicator all he needs to do is uncock the bolt then disassemble as normal.
I would be more interested in why he is checking the headspace on a new firearm. If it is new and has a problem I would be more inclined to contact Savage about the repair than try to diagnose and fix it yourself.
Dolomite
Re: Model 10 Predator Bolt
Yes, my first reaction to the question is:
"WHY?"
I think your buddy is trying too hard to over analyze things.
Re: Model 10 Predator Bolt
Dolomite,
You nailed it. It was the cocked indicator. All is well.
His wanting to check headspace was not unusual to me. I don't have many new guns, but I've never taken anything to the range without going through it --- just to make sure.
Thanks for your reply,
TAB
Re: Model 10 Predator Bolt
On a Savage the headspace is the last thing to worry about. One of the great things about Savage is thier near to perfect as you can get headspace. The barrel nut system is the reason as well as the floating bolt head. Niether you or he has any real reason to check headspace, after all, these arnt Remingtons.
El Lobo