savage 243 bolt head question

hi guys, about to turn a right handed 223 rem axis into a 243 win, is this the correct bolt head; https://www.gunpartscorp.com/Products/1401000A.htm

(looks pretty rough but if it's withing spec then i'm happy, i can polish it myself)

or am i better off with a aftermarket one like the PTG?

Yep. That should be it.

Was asking this since i read somewhere that 3 number models, like 110 instead of 10 are long action models, and from what i understand i need a short action bolt head for my axis. (?)
To further complicate things, in the description of Numrich they list the 30-06 in that same link, but. .243 is short action, 3006 long, so this is why i'm a little confused here :)

That bolt head is most likely a long action since it is listed as 110. At one time Savage built 223 & 308 on long action. Gun Shack might be the better choice.

Quote:

---

Originally Posted by sharpshooter

Axis bolt heads are short action bolt heads. The front baffle does not have the guide fin, but if you look closer you will find a long side and a short side. The short side to the right for long cartridges, opposite for short.

---

This

My mistake, sorry. I somehow misread a three digit number.