Atlas bipod but only one sling swivel

Hello everyone, I want to put an Atlas bipod on my 12 LRP. It came with the upgraded/updated HS Precision stock. This stock only has one sling swivel stud on the front. This model stock found anywhere else comes with two studs up front. Does the Savage version have a second hole with no stud and covered? I'd like to add a Sekins rail but need two screw holes. I have looked for this topic on this and other forums and come up empty. It looks like it was addressed a few years ago but the link given didn't work. What are my options for having an Atlas bipod?

Sounds like an easy project. Order the hardware and do it yourself! Drill a properly placed hole with a nut and washer on the inner side of the stock or get fancy and install a threaded pillar.

Or have a gunsmith do it for you if you aren't sure about doing it yourself.

Be brave. Drill that SOB.

Thanks. I don't mind drilling. I was mostly unsure if one stud hole was covered bu some sort of finishing coat of plastic. I will do some digging on drilling and tapping into the fiberglass stock.