My first Savage, model 10 P-SR, pics inside!

I've recently decided to get a .308 bolt gun and originally started looking at Remington 700's but quickly found that the Savage's offered much more value and features for the money, specifically the 10 TR and 10 P-SR. I really wanted the TR but couldn't find one at the time so I chose the P-SR.

So far it's got a Redfield 20 MOA base, a BSA Contender 4x16x40 AO scope (the Leapers is gone), and a UTG bipod. I'm trying to decide what I want to do about the factory stock. The aftermarket offerings for center feed, dbm, bottom bolt release stocks is pretty slim. As far as I know my options are, Choate, SSS, and only a couple models from HS Precision. I didn't list the manners and McMillan's because I can't justify spending $500-800 on a stock. I'd love to have a B&C but they don't offer one for Dbm actions. Will a factory accustock for the model 10 fit my rifle? If so, I may go that route. If you guys know of any options that I left out please post them up.

I will ill eventually be getting a suppressor but in the meantime I want to install a muzzle break to calm down the muzzle rise and recoil and also to finish off the tactical look. I need some help on this as well. I'm looking for one that has the same OD as the tip of my barrel (.802). I've know that the Ross brake can be turned down at the shoulder but the body is still .875. Do y'all know of one with an OD (.802)? I'm trying to get that continuous look.

Now on to the pics.

http://i116.photobucket.com/albums/o...ps6776b084.jpg

http://i116.photobucket.com/albums/o...ps1dc9f836.jpg

http://i116.photobucket.com/albums/o...ps464b88b2.jpg

http://i116.photobucket.com/albums/o...psb7868e1e.jpg

nice rig...good question on the brk.....Ill have to mic my cooley brk

Nice looking set-up.

I put my 10 p-sr in a used HS precision dbm stock. I had to do some dremel/file work around the bolt release lever and the trigger guard. I also replaced the recoil lug with a new one and replaced the huge bolt handle with a smaller factory one.

http://i1101.photobucket.com/albums/...h1111/ss-1.jpg

The Ross Schuler brake, when turned down to barrel diameter, looks fine. Plus, if you are going to buy a suppressor later, you will only be out $45. Most other brakes cost $80+.

http://i1101.photobucket.com/albums/...h1111/ss-2.jpg

http://i1101.photobucket.com/albums/...h1111/ss-4.jpg

That's a sweet looking rig you have there! As soon as mine is completed I'll post pics as well. I'm the kinda shooter who like to see how much bang I can get with a working man's budget and I think these rifles are going to be awesome shooters. I'm sticking with the factory stock because I intend to haul mine around in the woods in search of venison.

If you find a muzzle brake with that OD, please post the finding here because I would be interested in it as well.

CQH1111, I like the look of that Ross Schuler brake.

When finished mine with be fitted with an EGW 1-piece picatinny rail, a SWFA SS 10x42 Scope, a Vortex anti-cant bubble level, a Caldwell XLA pivotal bi-pod, a Karsten "B" model adjustable cheek piece and a PIG rifle stock pack. First chance I get, I'm going to add the Dark Eagle Custom 10 Round DBM to my setup as well.

What type of can are you thinking about putting on it? I'm waiting on a stamp for the Freedom MAG suppressor by Liberty Suppressors.

Again, SWEET RIG!!!

I've been looking into the Hunter Town Arms .308 can. They have some really nice features and are very affordable compared to most other .308 cans out there.

Huntertown Arms Kestrel .308 for $599.00 ?!?!?! My Liberty Freedom MAG cost $930 PLUS the $200 stamp.

Wow, that sounds too good to be true. When they say rated for 30 caliber (up to .308) what does that mean? Would I be able to put that can on my .300WM?

Warrantied against anything but STUPID......I like that.

I might have to add one of these to the trust and have a dedicated .300WM and .308Win suppressors.

$599 is MSRP, my LGS sells them for $500! They also stock AAC, YHM, Gemtech, and another brand I can't think of right now. They say that the HTA Kestrel is the best value hands down. Does it perform as well as an AAC? No, but most people can't even hear the 2-4 db difference. I'm pretty sure it'll be my first center fire can.

Nice rifle, I'd ditch the scope and rings for something a little better and not so tall before I worried about finding a stock and can for it. My BSA 6-14X40 never did track well but held zero for 6-7 years atop a .223, but the optics were terribly poor at the higher powers. Those rings just way too tall with that base for my tastes, and I'd try to get the scope down lower.

As far as the McMillan not being worth the money its all personal taste. I'd rather pay the extra money for the lighter weight over the Choate. I like the more options over the HS and B&C options for the Savage as well from McMillan. However, I wouldn't hesitate to have the B&C inletted for the DBM bottom metal especially when looking at Choate.

I like the looks of the Kestrel can as well and have been trying to figure out if I want to start the whole process of getting a can. I like the idea of them but most of the shooting I do doesn't really need one. I'm usually by myself most of the time at the private range I use or on my own property when I'm doing a lot of shooting.

Quote:

---

Originally Posted by taylorce1

Nice rifle, I'd ditch the scope and rings for something a little better and not so tall before I worried about finding a stock and can for it. My BSA 6-14X40 never did track well but held zero for 6-7 years atop a .223, but the optics were terribly poor at the higher powers. Those rings just way too tall with that base for my tastes, and I'd try to get the scope down lower.

As far as the McMillan not being worth the money its all personal taste. I'd rather pay the extra money for the lighter weight over the Choate. I like the more options as well over the HS and B&C options for the Savage as well from McMillan. However, I wouldn't hesitate to have the B&C inletted for the DBM bottom metal especially when looking at Choate.

I like the looks of the Kestrel can as well and have been trying to figure out if I want to start the whole process of getting a can. I like the idea of them but most of the shooting I do doesn't really need one. I'm usually by myself most of the time at the private range I use or on my own property when I'm doing a lot of shooting.

---

Thanks for the suggestions I actually ditched that scope after the first range trip. Now it's wearing a BSA contender 4 x 16 x 40 in some lower rings.

Quote:

---

Originally Posted by M4J0R T0M

Thanks for the suggestions I actually ditched that scope after the first range trip. Now it's wearing a BSA contender 4 x 16 x 40 in some lower rings.

---

Yep, I got that it is wearing a BSA and I'd replace that scope quickly. I've used cheap scopes to get by before and there is nothing wrong with doing it for the short term. You can get a far better scope for not much more money.

Quote:

---

Originally Posted by taylorce1

Yep, I got that it is wearing a BSA and I'd replace that scope quickly. I've used cheap scopes to get by before and there is nothing wrong with doing it for the short term. You can get a far better scope for not much more money.

---

What would you suggest? I've handled and looked through a couple Nikons before and they seemed pretty nice.

My recommendation........SWFA SS 10x42

This optic was originally designated for the US Navy. (a govt contract scope)

SWFA SS 10x42 Side focus kit is $400

Non kitted non side focus scope is $300

Review <--- Be sure to watch! (Sniper 101 series is excellent)

Another review

Thanks for the links. I watched both reviews and that's a pretty impressive scope. Would you suggest it for use as a hunting scope or just a long range target scope? Do you have any experience with the variable models?

A fixed 10X is a little much for a dedicated hunting scope, as you'll loose the ability to distinguish what part of the animal you're shooting at in close. If your wanting a scope to do double duty as hunting and target scope, a variable will be a better choice. Nikon Buckmaster 4.5-14X40 would be a good scope for both target and hunting.

Im running a weaver grand slam tactical 3x10x40 on my 10psr it used to be on my lmt mwse .308. I like lower magnification and not fixed. I mainly run on 3x most of the time.

Dual post deleted.

Here is a quick picture of mine. (I do apologize for the photo but I'm not good at photography)

http://img10.imageshack.us/img10/4811/tkq1.jpg

I intend to use mine for shooting at stationary targets greater than 100 yards. I have a .30-30 with a 3x9 Redfield scope for hunting as the regions where I hunt here in northern Va are quite wooded.

FOr a DUAL purpose scope I like the Weaver grand slam tactical 3x10x40 that Shooterfpga suggested. Mil-Dot reticle, 1/10th mil adjustments, raised turrets. 3X for hunting and 10X for when you want to reach out and touch something....the best of BOTH worlds.

Nice looking set up. That swfa looks pretty sweet! I'll look into that weaver as well.

Thanks! You might want to look into Dark Eagle 10-round DBMs also.

Quote:

---

Originally Posted by AgentMyth

Thanks! You might want to look into Dark Eagle 10-round DBMs also.

---

Ive already got a couple of those on the list as well as the extended mag release.

I've also found the stock I want to get. Boyds just released their Tacticool stock for dbm Savages. It's a laminate painted black and it weighs about three pounds so it's a little heavier than the high end stocks but the price is hard to beat at $109 plus shipping. I've got a Tacticool stock for one of my 10/22's and after a bedding job it's really accurate. A little heavy but plenty stiff unlike the factory rubber, I mean plastic stock.

Ooohh....I like that. I have this thing about trying to shoot just as good (if not better than) those who go to the range with rifle & scope configurations that cost 3 to 4 times as much as my rigs.

Sort, best BANG for my buck on a working mans budget philosophy.

Quote:

---

Originally Posted by AgentMyth

Ooohh....I like that. I have this thing about trying to shoot just as good (if not better than) those who go to the range with rifle & scope configurations that cost 3 to 4 times as much as my rigs.

Sort, best BANG for my buck on a working mans budget philosophy.

---

You're like me then. I get a kick out of the guys at the range that have thousands of dollars tied up in a rig and can't shoot worth a ****. The reality is that most factory stock, plain jane rifles will outshoot their owners most of the time. Don't get me wrong, it's their money and they can spend it how they want. But a new and expensive scope or stock or barrel will never make a guy a better shot.

Money is not a substitute for fundamentals and/or practice.

That being said, if I could afford it I'd have a Manners stock and a Nightforce sitting on top of my rifle, :)

MT,
If any of your local retailers have one in stock check out a Burris E1 I have bought a couple and like em a lot. Really good glass and tons of features for the cash. They have nice hunter turrets and though the clicks are a little softer than some really high end scopes they are very adequate and as good or better than some "high end "stuff I have used. So far they have been dead on repeatable passing several box tests and the glass is unbelievable fro a scope in this price range. I have always liked Burris products but this one definitely raises the bar for the competition.

I haven't installed it yet or gotten a chance to shoot with it but I recently got a great deal on a Redfield Battlezone 3-9x42 that was a store demo.I'm kinda skeptical because of the price but we'll see. It comes with turrets for 55gr.223 at 3100fps and 168gr .308 at 2650fps. The turrets are fairly large knurled tactical style and graduations are 1/4 moa. The reticule also has graduated hash marks in 2 MOA graduations. I'm not sure which .308 will get it yet, only that it'll be one of my .308s I think it will be a good one but only time will tell. The price was right and the warranty is listed as a "No excuses warranty" Though with all the Leupold products I've owned I've never needed their warranty I trust the warranty of products under the Leupold umbrella. Hopefully it'll be repeatable and last and change my mind about what a budget optic can do.

The Super Sniper was built to compete for a Govt. Navy contract, It did not get one. Someone in the SS marketing dept. is playing fast and loose with the truth. Some guy's seem to like them. My opinion there are much better budget options offered by divisions of some of the best known for quality optics companies in the world.


AM
Another great bang for the buck and an easy fun project is to make your own adjustable Kydex cheek riser/rest. The knobs and bolts are available at any good hardware store and the Kydex sheets are really cheap ( I got 3 10"x12" sheets for $14 enough to make 9 cheekrests) and easy to find and to work with. Lots of good videos and instruction online. Check out several sites and pick out a method that'll work for you, or you can pay someone six times as much to trim a piece of thermoplastic in the shape of a stock and supply some Ace hardware bolts and knobs for you. You still have to drill the holes and bend the sheet so why not save $40+ bucks a pop?