NSS action wrench

Big thanks to Jim at NSS for getting me the action wrench so quickly. I had been cussing an oak barrel vice for a few weeks now trying to get the oem barrel to break loose. From start to finish the barrel was off in about 15 minutes total after opening the box up. This thing was definitely worth it.

I broke mine loose with some light dead blows to the barrel nut wrench. Blocks made from old flooring are cheap. Spent that $60 on some nice Burris rings and a stainless trigger guard.

Quote:

---

Originally Posted by stewart33

I broke mine loose with some light dead blows to the barrel nut wrench. Blocks made from old flooring are cheap. Spent that $60 on some nice Burris rings and a stainless trigger guard.

---

i shattered my 5inch vice trying to get it tight enough to keep my factory barrel from spinning in the barrel blocks. even with the action wrench i had to put a 3 foot breaker bar and use a hammer to get the factory nut to pop loose.

best 60 bucks I ever spent on a tool.