16 Stainless LWH build question

I have a Savage 16 Stainless Light Weight Hunter and I had a question. And yes I look around for the answer first before I posted this. This rifle that I currently have is in .243 and I want to build it into a coyote rifle that has a bit more weight to it and a better barrel. My question is can I take the action from this rifle, get a Criterion or Shilen barrel in a varmint contour with a NSS recoil lug, and put it in a Bells and Carlson M40 Varmint stock? I know I will need a new trigger guard and bottom metal for the detachable mag. I’m just hung up about my action being a 16 and not a 10. And yes the bolt hole measurements are 4.40.

Thank you

Yes, your Model 16 action will fit the short action B&C M40 stock. You will have to select the correct model depending on whether you have a top or bottom bolt release.

That’s what I was really hoping to hear. I can keep everything all Stainless and cerekote it so it doesn’t rust, and get a better barrel and stock.

Should I look into bedding the stock?

The B&C stocks have an aluminum bedding block, the purpose of which is to provide a drop in solid bedding surface. I have two of them and didn't do anything more than bolt in the actions and head to the range. Others on this forum may have an opinion as to whether or not you can improve on them with some additional bedding work.

What you have proposed is a fun and easy project to do. Something to consider however, your final cost will be very close to what you would spend on a new Savage 12 Varminter Low Profile which is all stainless, has a fluted heavy barrel, detachable magazine, and comes with a nice pillared laminated stock. They are probably hard to find right now as with most firearms. Before the pandemic, the street price was around $925. And, you would still have your 16 LWH intact.



https://savagearms.com/content?p=fir...ummary&s=18464

Quote:

---

Originally Posted by Bill2905

The B&C stocks have an aluminum bedding block, the purpose of which is to provide a drop in solid bedding surface. I have two of them and didn't do anything more than bolt in the actions and head to the range. Others on this forum may have an opinion as to whether or not you can improve on them with some additional bedding work.

What you have proposed is a fun and easy project to do. Something to consider however, your final cost will be very close to what you would spend on a new Savage 12 Varminter Low Profile which is all stainless, has a fluted heavy barrel, detachable magazine, and comes with a nice pillared laminated stock. They are probably hard to find right now as with most firearms. Before the pandemic, the street price was around $925. And, you would still have your 16 LWH intact.



https://savagearms.com/content?p=fir...ummary&s=18464

---

O damn. Now my head is going to hurt trying to decide what way to go.

In all sincerity, thank you for your help.

I built a 7.62x39 out of a stainless LWH go look at my thread i cover everything from my custom barrel to the custom stock and everything between.

Sent from my SM-G960U using Tapatalk

Is your rifle top or bottom release?

Quote:

---

Originally Posted by Robinhood

Is your rifle top or bottom release?

---

It was a bottom bolt release then I converted it

Sent from my SM-G960U using Tapatalk

good deal. that would complicate matters. did you mill it flat or just convert it?

Quote:

---

Originally Posted by Robinhood

good deal. that would complicate matters. did you mill it flat or just convert it?

---

I bought a new sear/ bolt release and bent it just enough to clear the action. Just the part that's the lever not the sear part

Sent from my SM-G960U using Tapatalk

Where did you find the new sear/bolt release if you don't mind me asking?

Quote:

---

Originally Posted by futurerider103

I bought a new sear/ bolt release and bent it just enough to clear the action. Just the part that's the lever not the sear part

Sent from my SM-G960U using Tapatalk

---

Quote:

---

Originally Posted by Newtosavage

Where did you find the new sear/bolt release if you don't mind me asking?

---

Numrich

Sent from my SM-G960U using Tapatalk

Quote:

---

Originally Posted by futurerider103

Numrich

Sent from my SM-G960U using Tapatalk

---

Thanks. They aren't in stock now and I've heard rumors that sears are only being shipped to FFL's. Not sure how true that is though.

Quote:

---

Originally Posted by Newtosavage

Thanks. They aren't in stock now and I've heard rumors that sears are only being shipped to FFL's. Not sure how true that is though.

---

Has been true for years. Numrich gets them from time and again though so keep an eye out

Sent from my SM-G960U using Tapatalk