Printable View
I have an older model 116 (top bolt release and pre accutrigger) chambered in 270. I want to change the trigger to something a lot better and am undecided on what to get. I've been eyeing the timney triggers as well as the rifle basix. Which should I get? Any other recommendations..
I'm a fan of the Timney trigger. I have installed them on quite a few rifles and currently run them on both of my savages. Easy to install and adjust. Minimum is just 1-1/2#'s. On my last build I bought a nickel plated trigger. I had to tap the pin in place, seems that the plating decreased the hole size just a touch. Otherwise it worked like a charm and spent less than $100 for it.
Where did you find the timney for less than $100?
Ebay
I haven't been able to find one for that price yet
I swapped out two Rifle Basix SAV-2 triggers in Model 12 BVSS with good success.
I've been happy with 2lb of pull but you can go lower with them. The price is about the $100 range too.
I only needed to file down the upper bolt release slightly on them. They do work great.
HalfTrack
Myself a SSS comp trigger is your best bet
you my have to wait , I do not believe that there any available at this time
There is a blued one on eBay for $90 shipped. The nickels look like they've jumped to $115. Still lower than the rifle basix at $159
If your using it for hunting 1-1/2 to 4# should be perfect for adjustment
Yep it'll be used for hunting. Doubt I would want or need a competition trigger. I'll probably just go ahead and buy the nickel plated timney from ebay.
Timney 631, if I remember correctly the model #
Don't set it below 2lbs because it will not be safe, IMO.
If I can slap the bolt closed with out the trigger skipping the sear, I call that good and safe.
Bouncing the butt of the rifle on the floor is not a good way of testing trigger safety. The least, I get a plastic hammer and and hit the side of the stock besides the trigger with it while it's cocked and see if the sear holds.
If you have the original 3 screw trigger, it can easily and safely be set to 2 lbs. Plenty of information available here and else ware on how to make a lighter spring and safely adjust the pull.
Precision Reloading has Timney Nickel plated on sale for less than $100........
https://www.precisionreloading.com/c...=email&i=63116
Thanks guys. I ended up ordering a nickel timney from precision reloading plus I found a coupon for 5% off