-
Model 11 bottom metal
I have a model 11 sa that i would like to build around. It has the bottom bolt release and I would like to use a bell and Carlson stock like I have on my model 12. The model 11 doesn't really have any bottom metal. If I ordered model 12 accustock bottom metal from savage would that work and allow me to use the b&c stock. Is there any other components I would need to buy
-
The accustock bottom metal will work but you'll also need a magazine for it because yours will not work on the regular bottom metal.
-
for the mag, just get the bottom piece. It's metal and replaces the plastic one you already have. The rest of the mag parts are identical.
-
All you have to do is cut off the plastic locking piece on the magazine bottom and it will work. No need to change magazine bottoms.
-
They can use the same bottom metal.
Make sure your stock inlet is right for whatever set you get.
I've used 12 bottom metal and PTG on my 11
-
i called savage and they sold me the bottom metal and the magazine bottom and new bolts fit perfect and no issue there i installed a boyds stock like 2 days ago