Printable View
Going through a few sites for a rail, EGW says if the inner bolt space is 4.62 " center to center, I have a flat back, but as I look at the receiver it looks round on top. I just want to get a 20 moa rail, I like EGW but want to be sure I am getting the right one.
http://www.egwguns.com/savage/savage...y-scope-mount/
Post a photo and you will get a definitive answer.
If the top of the receiver aft of the loading/ejection port is round, it is a "round back."
Conversely, if the top of the receiver aft of the loading/ejection port is flat on top, it is a "flat back."
Good idea, but the system wont let me post
Read this and then try again.Quote:
Originally Posted by masterblaster
http://www.savageshooters.com/showth...eman-can-do-it!
In your original post you said your Savage is new. If new, it is a round reciever. As Thomae said just look at the reciever. If round aft of the ejection port it is a round action. Savage has not made flat rear recievers for a long time.
El Lobo
Thanks, I did and its round. Thanks guys.