-
ruptured case
when i fired this round i smelled burnt powder. i tried to eject it bolt came back brass stayed in the chamber it broke the extractor on the bolt. this was not reloaded ammo. it was a box of older 87gr remington. rifle 111 25-06. any idea what happened? could this have damaged the chamber
http://i774.photobucket.com/albums/y...l/DSCF1015.jpg
-
Re: ruptured case
check lot #with factory for recall.
-
Re: ruptured case
Did you buy the ammo new yourself (so you are sure it was factory ammo)?
-
Re: ruptured case
i didn't buy them myself got them from a friend but they apeared to be in the right box.
-
Re: ruptured case
put up a couple unfired case pics.
-
Re: ruptured case
Also, if you have a set of calipers, get a measurement of the loaded ammo case neck diameter please.
-
Re: ruptured case
You may have some flame pitting in the chamber so check it closely.
-
Re: ruptured case
http://i774.photobucket.com/albums/y...l/DSCF1048.jpg
.284 loaded case neck measurement. what is the best way to check for the chamber for flame pitting? if it is pitted what will it effect.
thanks
-
Re: ruptured case
Most likely the chamber is not flame "pitted". You could use cerosafe to check it. The brass was to soft in the web area that is why it ruptured. I would send the rest of the ammo back to Remington(looks like Rem. ammo) along with the cartridge that ruptured. They will replace the ammo, If the chamber was damaged they may replace the new barrel for you.
Best regards,
Grit