-
Muzzle brake removal
Good Morning,
I've been wanting to get into F-Class shooting and found out that muzzle brakes are not allowed. My problem is that I own a 10-FCP-K which has a muzzle break installed from the factory. Is there any way to remove the brake and replace it with something that will make it legal. I know that I could possible just unscrew it, but the threaded end on the barrel would be tackey to say the least.
Any help or guidance will be greatly appreciated, Ken
-
Re: Muzzle brake removal
Numerous postings on this of late. Yes it can be removed. It looks like the break is installed with a crush washer. Find a wrench to fit and twist it off. Should be just that easy. After that do some looking and find a thread projector for the muzzle.
http://savageshooters.com/SavageForu...?topic=31483.0
-
Re: Muzzle brake removal
If you don't plan on using it again you could just have a smith cut it off and crown it. I also have seen where you can get caps for the threads for about $40
-
Re: Muzzle brake removal
Great!!! Any idea where that caps for the threads can be found? I like that idea much better than cutting off the barrel.
Thanks for the info, Ken
-
Re: Muzzle brake removal
I know I have seen them a few different places but the one I know for sure is savage-barrels.com under the store tab you have to know the dimensions and TPI though.