Printable View
Looking for a bipod for my 10 BA Stealth, 6.5 Creedmoore. I've seen lots of reviews for lots of bipods. Trying not to get too expensive if I can. I looked at the Firefield Stronghold Bipod for around $53. Any thoughts on the Firefield or other Bipods that are good and not $100?
Peleton products are solid. Good luck
https://peletontechnology.com/rifle-bipods/
I've been able to do more research today and it looks like the Tiptop bipods are exactly what I'm looking for. Great reviews and within my price range.
Sent from my XT1254 using Tapatalk
Bipods are one area you really don't want to go cheap on. Most of the cheapies ($60 or less) are made in China and don't hold up well. The rivets used to hold them together are soft and loosen up after little use.
Yep. Get ready to do some mods. Even guys using expensive bipods find themselves doing modifications.Quote:
Originally Posted by J.Baker
I went through a few lower cost bipods before understanding exactly how the lower cost bipods differ and how those differences impact your accuracy and precision.Quote:
Originally Posted by Abridge
First what are your long term goals for how you will utilize this specific rifle. If you plan to shoot prone at targets beyond 600yds and you are looking to hold 1 MOA and/or if you will be shooting often in the elements, than you will want to spend more. However if you are intending to mostly shoot a few hundred yards or less and 2 moa is ok and you will not be using the bipod often then there is no need to spend much.
Here is what I found.
First i picked up a Harris knockoff from Amazon for $30 it got great ratings and seemed like a solid build. However after just a few trips to the range I noticed that the screw which tightened the lock to the stock would work loose sometimes after a few rounds. I started really cranking down on it and then the plastic handle cracked. I repaired it but relegated it to a hunting rifle.
I picked up a UTG bipod at a gun show for about $45 it was light and the legs locked in fairly tight, but when leaning into the gun to fire I noticed the legs would bend slightly. After firing the recoil would bounce the gun and the legs seemed to spring forward so I would have to spend more time getting back on target.
I picked up another gun show model for $95. It’s a private labeled bipod which was built very well. I took this to a training camp and shot out to 1200yds. Overall it performed ok, but the trainer noticed a few things. I was having trouble canting the gun between rapid strings of fire. The design of the head used a small Allen screw to apply force to the rotating head. We tried several times to tighten this up but it never really made much difference. The set screw was so small that eventually the hex stripped. I still use this on my AR.
He loaned me a genuine Harris bipod at that time and I could immediately feel the difference. The gun would not flex in the bipod head and the legs were real stiff while pushing against the bipod. I was able to spend less time between shots fidgeting with my gun in order to get back on target.
After that event I himmed and hawed and finally decided to get an Atlas Bipod. I had seen a few guys using them at the training event. The funny thing was that I ordered it on Amazon for about $350. What I got was a ripoff Chinese copy. It looked almost correct but I could feel a lot of slop in the movement and the locking mechanism.
I contacted Amazon immediately and the refunded the purchase and I ordered a new one directly from the Atlas website. When it arrived I closely compared the two units. I found that while the copy looked good the parts were stamped or cast where the genuine Atlas bipod had all parts machined or turned on a lathe. The tolerances were very tight. The legs locked into position with no play compared to the copy where the lock would wiggle several degrees.
The quality of the Atlas means that I can get into shooting position more consistently. I’ve got enough to worry about just getting my head in the right spot, so not having to worry about the bipod twisting does make a difference.
Here is a shot of the current setup.
https://uploads.tapatalk-cdn.com/201...0cc9b36d5b.jpg
Here is an example of the groups you can expect at 100yds, with this great rifle, when you are shooting quality ammo from a stable prone position.
https://uploads.tapatalk-cdn.com/201...682f22f0d1.jpg
Good luck with your search.
There really isn't a reason to go high dollar, just find one you like, make sure it's one of the shorter ones and that it has notches for the height adjustment... the ones that don't have notches are very difficult to adjust evenly. I believe mine in it's lowest position is around 9 0r 10 inches. I had one of the taller ones and it was nearly impossible to adjust it low enough on a bench. $50 -60 range is imho as good as is needed.Quote:
Originally Posted by Abridge
Sent from my SAMSUNG-SM-G935A using Tapatalk
Here's what I did at 100 yards with my $50 bipod, the first ones covered with the black stickers were tuning my scope then after that, 4 more through the same hole... the second picture is at 400 yards, still working on my loadhttps://uploads.tapatalk-cdn.com/201...a683c487b3.jpghttps://uploads.tapatalk-cdn.com/201...c31ec09ad5.jpgQuote:
Originally Posted by ToolAA
Sent from my SAMSUNG-SM-G935A using Tapatalk
That was 12 shots... 3 x 4 round magsQuote:
Originally Posted by Ted_Feasel
Sent from my SAMSUNG-SM-G935A using Tapatalk
Bipods are not unlike scopes. Some people shoot 300 dollar scopes 1000 yards. I have, and successfully. At the end of they day it boils down to expectations and intended use. People that have never used good equipment don't know what there missing. People that have know what they can get away with. My experience with cheap bipods was extra effort to the point of fatigue.