A 6.5 is one of my next builds...and after doing all the homework, mine will be a 260 Rem AI on a long action. Just can't beat it without going to like a 6.5-06 or a 26 Nosler!
Printable View
A 6.5 is one of my next builds...and after doing all the homework, mine will be a 260 Rem AI on a long action. Just can't beat it without going to like a 6.5-06 or a 26 Nosler!
Great choice and look forward to your results. I like the 6.5 bullet but 6.5 284 norma is as big as I will go with it--I'll take more heft in a bullet beyond that. On the other hand, I'm curious to see if Deano can get 5000 fps out of the 26 Nosler. ; )
I'm shooting a 6.5x284 this year as my deer, coyote, mountain lion, and antelope gun. For an "all around" caliber however I prefer the .338 Win Mag. The smaller 6.5 caliber isn't quite as versatile when you get to the bigger stuff, moose, elk, and bear in my opinion.
My uncle used the .264 Winchester Magnum (Lat '50s and into the '60s) to hunt elk. He was very successful with the Sierra GameKing of the day, taking elk out to at least 600 yards. He was one of the first to actually tape balistic tables on his stock and to ensure they were right.
As for moose and bear, tons of moose have fallen to the 6.5x55 with standard bullets but I would suggest a 140gr all-copper hunting bullet if one intentionally goes after moose. Bear will likely be vulnerable too and having a couple of those 140gr copper bullets (Lapua Naturalis, for example) for the second or third shot is likely prudent if one is hunting an area where accidental encounters are possible. But, a larger caliber with heavier bullets is likely a smarter choice when the intent is to go after brown bear.
Apologies in advance for continuing to be slightly off the Creedmoor topic --
Had your build been with a 6.5 Grendel SAAMI spec chamber and standard hardware, your experience could well have been different.
Several Grendel shooters have gone through the trouble of shooting factory ammunition in all available bullet weights. The results have been consistent sub-moa groups at 100 yards, sometimes below 0.3 moa. Cycling and feeding problems are near non-existent with properly installed hardware. Some of these shooters have also run groups using handloads with bullets as light as 85 grains to as much as 140 grains. Again, no problems with cycling, and accuracy consistently sub-moa with some truly outstanding groups popping up.
The few instances where this was not a Grendel shooter's experience have almost always been traced to non-standard chambers with the .264 LBC being one on the better performing non-standard chambers or to inappropriately selected bolt heads, etc.
The 'finicky' part of the loads is largely a result of the parallel freebore used in the LBC and most of the Grendel knock-offs. The compound throat in the Grendel was implemented precisely to ensure accuracy over a very wide range of bullet weights and nose shapes.
I appreciate your input--I've heard it both ways--that the compound throat design in a SAAMI complaint grendel can be touchy as well--but admittedly I've only experienced the 264 lbc flavor. I'm not questioning the accuracy--I've had groups that I've never seen in an AR platform and rarely even in a bolt gun.
My personal opinion is that the overall design with it's wide case (relative to a 5.56) and sharp shoulder angle is problematic in terms of adapting to a robust AR15 environment. I could of course be totally off base and wrong, and you're right I'm judging from my limited experience with a slightly modified version. Once again--just my opinion-- and I'm not suggesting it's not a great shooter.
I confess to being an old Geezer. Many years ago, I built a 6.5 x 55 Swede on a M98 action. This was long before the Creedmoor, the Grendel, or the .260 Remington had ever seen the light of day. In reading the ballistic comparisons for 140 gr bullets in the Swede, the Creedmoor, and the .260 Remington, I do not see where there is a nickel's worth of difference between them. If I am missing something, please enlighten me. Thanks.
I've never seen a Swede in the flesh (gun, that is) though I know they're out there. Part of the problem is relative late realization of the inherent accuracy of the 6.5 in this country, I think.
I just saw an ad for a new Heavy bbl rifle by Ruger (horrors!) in 6.5 Creedmore. Currently, I shoot both a 14" TC Contender and a rebarrelled Axis in 6.5 TCU. I have been 'tempted' by both the Grengel and the Creedmore. Those 6.5 mm bullets are fantastic......
Always the maverick, when everyone in my IHMSA group was flocking to the 7 mm TCU, I 'had' to go to the 6.5. I never lost a target.
ron
My "philosophy" about the 6.5 is that the American market is still searching for the ideal cartridge that will "break away from the pack" and assert itself as a true standard-bearer. I don't have anything against any of the current configurations--but they all seem to have issues which hamper them from gaining wide-spread acceptance across both target and hunting communities. Maybe some more wildcatting will find that ideal load?
I have been loading since 1966 so many cart. I cannot remember some of them . There are so many cal. that will do the same thing if the shooter does his part that we would not need any more. But where is the fun in that ? We have to keep trying for that ultimate load .
True, being standardized through the SAAMI / CIP process is a necessary first step in popularizing a cartridge. Of course, the cartridge generally has a good following in the wildcat and specialty ammunition manufacturing community first. A notable example is the multiple decade history of the 25-06 as a wildcat before Remington standardized it.
After that, popularity depends on several factors, ultimately being determined by how many shooters actually buy rifles chambered for a particular cartridge. The easy path is a cartridge standardized by the military -- that brings an automatic popularity. Next is a major manufacturer whose marketing folks' imagination is triggered by a particular cartridge and they hype, place ads, and encourage articles by well-known gun-writers who, coincidentally(?), know that it is far better to pat than to pan these products. Last in importance are the actual ballistics of the cartridge.
At least seven cartridges in 6.5mm /.264" caliber have SAAMI Specifications, including the venerable 6.5X55 Swede that is enormously popular in Europe. Ammunition for this cartridge can be purchased for as low as $18.00 per box at Midway.
260 Remington ammunition runs at about the same price as what one calls 'standard' or 'normal' ammunition in cartridges like the .308 Winchester, 270 Winchester, 25-06 and the .243 Winchester with bargain basement ammunition running about $5.00 / box less. Ammunition for the 6.5 Grendel runs a tad less than that of the .260 Rem -- probably because less powder is used and less metal goes into the brass.
The real question is: "Has the 6.5mm / .264 caliber arrived as a major factor for the American shooting public?" My view is that it is getting there but agree that large scale acceptance of the caliber is in the (likely near) future..
6.5s will NEVER be as popular in the US as other "standards", due to a number of factors that involve historical precedence in this country (military use of 30 calibers, Jeff Cooper's regaling of the 270, OMFG its a Euro metric caliber GTFO, etc.)
Case in point: the classic recommendation of a 308 over ________ (insert more modern cartridge design with better ballistics here) for a new shooter.
Maybe but theres a lot of banter of which 6.5 is best. I laugh when people complain about seating vlds to the rifling and have trouble in the other 6.5's. Or short brass life or velocity (Grendal)....theres a reason the hornandy engineers designed a new 6.5 from the ground up. Better brass and barrel life, good efficiency compared to the other 6.5's and still maintain powder capacity and neck length in a short action cartridge. Even allowing bullets to be seated long or short with no issues.
I think the big hinderence worth the 6.5 calibers, in America, is the, "If a little bit is good more is better" attitude of the typical American.
I say that as a 6.5x284 Norma and .338 Win Mag shooter.
Turning back to the OP, the Creedmoor is an excellent choice as an all-round cartridge for North American hunting -- especially if one handloads. At the light end are the 85-90 grain bullets that will give 243-like recoil and lots of fun for casual shooting and varmints all the way through to the 140gr Lapua Naturalis or 155-160 grain roundnoses that can be (and have been) used for Moose. This span of capability helps explain the popularity of the 6.5 in Europe.
Also, take a good look at the Hornady 120 gr GMX Superformance load for the Creedmoor. This is not too much for deer and antelope and a good choice for elk (see http://shootersnotes.com/ideal-bullet-weight/ or the calculator at http://shootersnotes.com/calculator/...bullet-weight/). The recoil is also mild enough that the hunter won't be as distracted as would be the case when using a .308 Winchester with 165 - 180 grain bullets.
These characteristics would make almost any 6.5 with a case volume anywhere from that of the Grendel through to that of 260 Remington an excellent choice for the beginning hunter who already has some experience with the .223 Remington. The Grendel enjoys lightweight rifles and is an excellent choice if one wants to use the AR15 as the hunting platform out to a few hundred yards while the Creedmoor is superb as a long-range round with very flat trajectories in bolt-action rifles. Both do fine near the muzzle as long as the bullets are built for the velocity.
I had the same dilemma a while back, 6.5CM vs 260 rem.
Die choices and brass steered me to 260.
I have built a .260 and two rifles in 6.5 Creed. All are great and all are super accurate. The .260 is nice because I can just buy winchester .243 brass and neck up and trim. The Hornady brass for the Creedmoor is great...I have fired one batch going on 5 times and it still has tight primer pockets and shows no signs of giving up. I don't think you can go wrong with either, but I think the coolness factor goes to the Creedmoor. That's why I chose it for my latest build already have one each in .260 and Creed.