B&C Medalist for Savage 110 LA stagger-feed . . . . Your Opinion

I'm considering purchasing a B&C Medalist for my Savage 110 LA stagger-feed rifle, Has anyone purchased and mounted one of these? If so, how was the fit, feel, and did it improve your accuracy?

This is the product information I received from B&C when I emailed them:

Savage ~ All Bell & Carlson stocks fit the blind magazine (no bottom metal).
Center to center on the action screws 5 1/8 and staggerfeed (long action)
Sporter style Medalist 2980 (standard bbl)

Jeff

I would love to do that also. I have the B&C Medalist on a short action and love it. However I have talked to a stock pro and was told no way to make it work without a huge amount of work and money.
So for me not gonna waist my time prob go with another B&C with a kydex cheek rest. Good luck.
T

Maybe I mislead you with my post Rover. The Medalist Medalist 2980 is a LONG-ACTION stock that B&C makes for the Savage 110 stagger-feed series. They haven't updated their catalog yet but it does exist. I still can't believe that no one here, a Savage dedicated site, has never purchased one of these. Wow!

Jeff

AFAIK they just came out within the last few weeks.

Medalist Sporter, not Medalist Tactical...important to note the difference.

B&C doesn't make the Medalist Tactical for the long action...much to many folks' (myself included) chagrin.

This is the entire list of Savage stocks from B&C themselves. There's some good information here:

Here's all the specs for Savage stocks offered by B&C:

Savage ~ All Bell & Carlson stocks fit the blind magazine (no bottom metal).



Center to center on the action screws 5 1/8 and staggerfeed (long action)

DuraMaxx 7112 (heavy bbl)

Carbelite 5071 (standard bbl)

Sporter style Medalist 2980 (standard bbl)



Center to center on the action screws 4.25 and staggerfeed (short action)

Varmint Tactical Medalist 2999 (heavy bbl) - LOP 13 3/4

DuraMaxx 7110 (heavy bbl)

Carbelite 5072 (standard bbl)



Center to center on the action screws 4.389 and centerfeed (short action)

Varmint Tactical Medalist 2997 (heavy bbl) - LOP 13 3/4



~~The older design internal mag box has a staggered feed mag sleeve that is attached to the receiver.

~~The newer design internal mag box has a center feed mag sleeve that is not attached to the receiver and is held in place by the stock.

~~ FYI ONLY The newer detach box mag system has a center feed detachable mag box (NOT PERTINENT TO B&C STOCKS SINCE OURS ARE ALL BLIND MAG)

Still nothing for us LA Centerfeeders...

Is the long action stock different between the stagger feed and the center feed? I know it was an issues with the short action because the screw spacing changed, but I'm pretty sure that the screw spacing is the same on the two long actions.

Quote:

---

Still nothing for us LA Centerfeeders

---

If you don't want a DBM it is easy to convert a LA stagger feed to a center feed. I ordered a center feed magazine, L clip and follower from Savage. All that is necessary to convert the stagger feed blind magazine is to inlet the stock area just in front of the rear pillar so that the L clip fits flush. After that you block the mag well so that there is no right-to-left and fore-n-aft movement of the magazine box. Works great.

Quote:

---

Originally Posted by wbm

Quote:

---

Still nothing for us LA Centerfeeders

---

If you don't want a DBM it is easy to convert a LA stagger feed to a center feed. I ordered a center feed magazine, L clip and follower from Savage. All that is necessary to convert the stagger feed blind magazine is to inlet the stock area just in front of the rear pillar so that the L clip fits flush. After that you block the mag well so that there is no right-to-left and fore-n-aft movement of the magazine box. Works great.

---

WBM.... You got any pics to post of the conversion or at least the finished product?

Jeff

I don't have any pics but I'll borrow my sons camera and see if I can get a few. I used a Savage walnut stock off a 114 on my first attempt and it was fairly easy.

I think the instructions with pics would be a great DIY sticky.

Jeff

I'm in the same boat wanting to fit a CF mag to a SF stock and so far, can't get feeding to be 100% reliable and getting some bolt galling on the magazine lips.

I ordered a center feed long action magazine, clip, and follower from Savage for $30. (They got it here fast!)

The stock was a Savage LA from a 114U.

All that is required to convert is too inlet the stock in front of the rear pillar so that the clip fits flush. The clip is a separate piece that has a tab that fits into the magazine and keeps the rear of the magazine at the correct height in the mag well.

The remainder of the fitting is up to the individual. I used a type of tape that is used by water well drillers to make water-tight seals on pipes. It is pure rubber with a backing film that comes off so that it sticks to whatever you put it on and also to itself. Works GREAT! You can get it at Ace or Home Depot. (Sorry don't know the name of the tape)

After two wraps the magazine fit as tight as the magazine on my center-feed Savage BVSS stock. Took me less than an hour to do the retrofit. Magazine functions perfect!




[img width=600 height=175]http://farm6.static.flickr.com/5215/5396271498_7cedac2f85_b.jpg[/img]

Quote:

---

Originally Posted by wbm

Quote:

---

Still nothing for us LA Centerfeeders

---

If you don't want a DBM it is easy to convert a LA stagger feed to a center feed. I ordered a center feed magazine, L clip and follower from Savage. All that is necessary to convert the stagger feed blind magazine is to inlet the stock area just in front of the rear pillar so that the L clip fits flush. After that you block the mag well so that there is no right-to-left and fore-n-aft movement of the magazine box. Works great.

---

was there any mods needed for the action itself? other than shaving that 1/16" in the stock?
what about feeding, is the center feed better?

No other mods needed at all. The center-feed is better for all the WSM control round feed cartridges and the 7mm magnum.

I am going to use this setup for a 6.5 Creedmoor so we'll see how that works. Shalom!

WBM

Now that's cool! You say all you need to have is the center feed long action magazine, clip, and follower from Savage for $30. Do you have the Savage part numbers for the conversion parts?

Jeff

You go to the Savage web site and click on the parts search. You have to enter a rifle serial number and then it will give you a numbered schematic and you click on the part you want.

Quote:

---

Originally Posted by wbm

I ordered a center feed long action magazine, clip, and follower from Savage for $30. (They got it here fast!)

The stock was a Savage LA from a 114U.

All that is required to convert is too inlet the stock in front of the rear pillar so that the clip fits flush. The clip is a separate piece that has a tab that fits into the magazine and keeps the rear of the magazine at the correct height in the mag well.

The remainder of the fitting is up to the individual. I used a type of tape that is used by water well drillers to make water-tight seals on pipes. It is pure rubber with a backing film that comes off so that it sticks to whatever you put it on and also to itself. Works GREAT! You can get it at Ace or Home Depot. (Sorry don't know the name of the tape)

After two wraps the magazine fit as tight as the magazine on my center-feed Savage BVSS stock. Took me less than an hour to do the retrofit. Magazine functions perfect!




[img width=600 height=175]http://farm6.static.flickr.com/5215/5396271498_7cedac2f85_b.jpg[/img]

---

Good info and pics wbm Gotta get some of that tape.

I'll see if I can get a name for the tape. I do remember that it is a bit pricey.

I'm back to re-stocking this gun.
Thanks for the replies and suggestions.
T

I bought a Centerfeed LA BVSS stock from Northlander and modified it to fit my staggerfeed long action.

Took me about an hour of measuring, dremeling, cleaning, test-fitting, and repeating that about a dozen times but it works quite nicely; I trimmed a fender washer approx. 0.060" thick from Home Depot to fit the centerfeed magazine L-clip channel. Shoots very well, but one day I'll get around to bedding the action and it should be 100% complete.

Quote:

---

Originally Posted by longarch

I'm considering purchasing a B&C Medalist for my Savage 110 LA stagger-feed rifle, Has anyone purchased and mounted one of these? If so, how was the fit, feel, and did it improve your accuracy?

This is the product information I received from B&C when I emailed them:

Savage ~ All Bell & Carlson stocks fit the blind magazine (no bottom metal).
Center to center on the action screws 5 1/8 and staggerfeed (long action)
Sporter style Medalist 2980 (standard bbl)

Jeff

---

My sporter Medalist just came today by UPS very nice looking and sleek lined comparing it to the Duramax (which I have 3).......I dropped in a Stevens LA CF with only slight fitting at the tang and one rough spot in the barrel channel...The Shaw sporter .260 fit real well other than the one high spot....I modified a CF mag and follower with two sheet metal straps which hold the follower spring from pushing the mag upwards and then shimmed it snug fore and aft with plastic sheet stock...The magazine was a 7mm mag so I had to tweak the lips but it works pretty good now....

Hopefully I will get a chance to shoot this rig Saturday, will post results later....All three of my Duramaxs shoot 1/2 MOA with a variety of barrels so my guess that this bedding block on the Medalist will only be better than the pillars because it fit so well and torqued up so nice.....

Later,
Randy

Tried the rig today..shot OK (3/4 moa)...but with loads worked up for a different gun....Noticed that stock needed a little more trimming behind the trigger group (Rifle Basics SAV-1).....trigger just rubbed and caused heavier than set pull...Removed the stock right on the bench rest and filed a "smidge"..torqued it back on and shot the best groups of the day after that....This stock is just what I have been looking for for a hunting rig..lightweight..durable..accurate and looks great (mine is tan with black spider web)....
Randy

Mnbogboy- im starting down the same path with a 110 LA and metalist stock. Do you know if the stock will work with a heavy sporter contour(0.729" at the muzzle)? This is a criterion barrel from Jim at NSS finished at 24". Just hoping to avoid fitting issues.

Zinhog, There should be plenty of "meat" in the barrel channel to fit it nicely but most likely you will have to remove some material to fit it....I have a Shaw 6.5-06 magnum contour barrel on order and plan to use this same stock in another action (110) with it...I am expecting having to remove quite a bit for it also, being that the sporter contour is a close a fit already....
With a "cheap" barrel on it the stock so far has produced quite a few groups for me in the .3s & .4s with a .19 at best....I believe the stock is better than the barrel so I am completely satisfied...(BTW I haven't skim bedded it yet because of my plans for use with the other action. That can only add to its accuracy....
Good Luck,
Randy