Bell and Carlson stock request................Long Action M40?

A few members asked me to post this up as they keep hounding us to produce a new stock.
We have already prototyped the stock (over a year ago) but have yet to produce a mold for it.

The request is for our "M40" style stock for the following:
-Long Action
-Heavy Barrel
-Factory bottom metal/detachable mag
-Bottom bolt release or Top bolt release versions


Who wants it?
All input is appreciated.
Is there additional models desired?


Misc notes:
-All of the Long Action, Heavy Barrel, Savage rifles I've put my hands on have been top bolt release.
-Production numbers for this configuration seemed light back when we prototyped it.

Just the stock I could have used 2 months ago - if it were left handed. I'd like any of your Varmint/Tactical styles, any action length in lefty, come to think of it. The ones I've seen look very good, but that pricepoint isn't one where I'm willing to break out the epoxy, rasp and paint to convert it to left hand. Did that to a Duramax I picked up, but that was at $75 not $275.

I would buy one.
I request a fully adjustable butt with LOP spacers and clamp bar style cheek piece.

I'm the odd man out. I would prefer one with a sporter contour channel in it. I can always open it up if I wanted to but you can't go back the other way.

Quote:

---

Originally Posted by stomp442

I'm the odd man out. I would prefer one with a sporter contour channel in it. I can always open it up if I wanted to but you can't go back the other way.

---

Good idea as well.

I would buy one today, exspecially if it was a blind mag.

I finally broke down and bought a Choate Tactical recently for a 110FP (blind mag, top release). I've had it for a decade waiting on a decent upgrade to come along.
Though the heavy barreled long action rifles have been in production for quite a while, there aren't a lot of options out there for them.
Additional quality choices that don't break the bank would be nice especially if they don't weigh 2 tons.
I'd definitely prefer the barrel channel be drop in for the heavy barrels and here is why.
The thing about hogging out a sporter to make it fit is that : I'd hate to order an aftermarket stock not knowing there was going to be enough forearm left after increasing the barrel channel, and no one is going to take one back or warranty it after it's done. Second hand value would also be diminished on a "bubbad up" stock.
Therefore I wouldn't risk taking a beating of a couple of hundred on a stock labeled for a sporter barrel if a heavy barrel was my intent.
Good luck and I would love to see this come to fruition.

I have been after this exact stock. With bottom bolt release. I would buy one in a second. And then probably a second one soon after.


Sent from my iPhone using Tapatalk

Thanks for the input!!!

I phoned a Savage employee but have yet to hear back on production numbers. I inquired about LA & SA production numbers with the factory DM (bottom or top) in comparison to overall numbers. Fingers crossed I get a response this week.

If the M40 style comes about (which I'm sure it will) our new adjustable target/competition style stock will be up next for review. (likely both LA & SA)

Yes, please. Top bolt release and blind mag.

And some left handed models would be nice too. Thanks.

Top bolt release, heavy barrel channel and blind mag would be cool!

Any new news here?


Sent from my iPhone using Tapatalk

,,,

I have been working with the Long Action, M40 pattern but haven't received the greatest response for the configuration we were intending to do.


The request is for our "M40" style stock for the following:
-Long Action
-Heavy Barrel
-Factory bottom metal/detachable mag
-Bottom bolt release or Top bolt release versions

The major hold up is that the numbers to support the configuration above seems small. Some of the requests on here support that. (blind mag).

The next week should provide some direction on what we will be running. A short action version of our Remington #2095 for the Savage looks as it is on the horizon as well.

I asked this in an email recently. I'd kill for a long action, blind mag, heavy barrel version. I've got a frankengun long/short action with a precision car in barrel in it sitting in one of your stocks (the only model you have available for long actions) that I had to hog out to get the barrel to fit. Looks like junk but shoots great.... I just love the aesthetics and shootability of the m-40 for hunting and I'm not willing to get rid of that old action sooooooo. Like I said in the email, I'll pay for a prototype that would work you have laying around if you're willing.

I would love one as well. I'm really looking for something for a LA, but there is just not much out there if you don't want laminate. Manners doesn't even make a LA stock anymore. I had a Stockade once and wasn't thrilled with the fit and finish. The 6mo+ wait time is tough for the McMillan, but looks like I'm stuck ordering one after tax returns.

Manners does not list them on there web site. But last time I talked with them on the phone they said that they could still make them. They were like a 6-9 month wait too. The only way they would make one was if you sent the gun to them and they would bed it and everything


Sent from my iPhone using Tapatalk

This was just about 6 months ago I received an email saying they no longer do Savage LA. I went back last night and they have even taken Savage SA off of their options...

The request is for our "M40" style stock for the following:
-Long Action
-Heavy Barrel
-Factory bottom metal/detachable mag
-Bottom bolt release or Top bolt release versions

Due to the 2016 Catalog and input here, I'm going to possibly change up the configurations to cater to the older firearms out there as we know we will sell some stocks. Betting on Savage building heavy bbl rifles with the newer factory DM/bottom metal can come down the road if need be.

So this is what I'm about to start making chips on. Don't hold me to it now, things change hourly this close to SHOT. Naturally I'd like to have it at SHOT so if that happens it will or should be available around the first of Feb.

"M40 style"
-Long Action
-Heavy Barrel
-Blind Mag

Now, do me a favor and hit up https://www.facebook.com/Bell-and-Carlson-123876127629793/ as it will help seal the deal.

Quote:

---

Originally Posted by Gunner75

The request is for our "M40" style stock for the following:
-Long Action
-Heavy Barrel
-Factory bottom metal/detachable mag
-Bottom bolt release or Top bolt release versions

Due to the 2016 Catalog and input here, I'm going to possibly change up the configurations to cater to the older firearms out there as we know we will sell some stocks. Betting on Savage building heavy bbl rifles with the newer factory DM/bottom metal can come down the road if need be.

So this is what I'm about to start making chips on. Don't hold me to it now, things change hourly this close to SHOT. Naturally I'd like to have it at SHOT so if that happens it will or should be available around the first of Feb.

"M40 style"
-Long Action
-Heavy Barrel
-Blind Mag

Now, do me a favor and hit up https://www.facebook.com/Bell-and-Carlson-123876127629793/ as it will help seal the deal.

---

Are you talking older stagger feed blind mag, or newer centerfeed blind mag? And will they be able to be inlet for aftermarket bottom metal from Accurate Mag or CDI?

Done. Used to live south of Dodge in Ashland and my friends mom still works for B&C. Hope to see them build a LA stock.

Sounds great except for the blind mag, Really? Center feed factory mag would be far better IMHO.

Quote:

---

Originally Posted by ninner

Sounds great except for the blind mag, Really? Center feed factory mag would be far better IMHO.

---

I see a lot more blind mag rigs on the pawnshop market which is all I buy. I would guess there are more on the market since they were in production for much longer. Just a guess.

As much as I would rather build the LA with factory DM (I think the center feed guys could buy components and switch over), it appears we are going to start with the old stagger feed first simply based on shear numbers. If Savage would stop changing it up every few years it would certainly help. Will keep this updated, now to get to making chips!

This is fantastic news. I'll be the first in line.

DO NOT PHONE, check in on our website. Savageshooters.com info only. The new #1018 (Description below) will be available shortly. Finished the mold last week. Just gotta finish up some loose ends and it will be complete. I would guess we will open up ordering by Feb 1st if not a week or few days earlier.


"M40 style"
-Long Action
-Heavy Barrel
-Blind Mag
-Stagger Feed


Even though I have a "list" to work from, what would you all like to see next? I'll be at SHOT and one of the first items on my list is to catch up with my good friend at Savage to talk numbers (production numbers on rifles). I'm still thinking a LA M40 with factory detachable mag would be great but not sure numbers support it. Guess I'd be looking to Savage up one of our new adjustable styles after that. Thoughts?

We NEED a LA stock for later centerfeed BDM Savages. I have 2 in the safe with the accustock that I'm just not happy with, so much so that they just stay there because I don't have good options to build off of them without spending $800 on a custom stock. There are tons of them out there, and I know guys who would love to replace the stocks on their long range hunters as well.

What I'm thinking is make this with options you list but in CF.
You then can sell it to both CF and SF owners.
Offering only in SF requires work to install CF magazine components.
SF (attached box) will drop into CF stocks (blind mag) no modifications needed.

I would love a left hand short action dbm bottom bolt release with a sporter channel


Sent from my iPhone using Tapatalk

I bet you couldn't make a Target/Comp model for both long and short actions fast enough...

Short is next on the list.....guess we will see.

I second the need for a M40 in a long action, top bolt release, DBM.

Sent from my SM-G930V using Tapatalk

any plans on making the savage sporter style dbm in a short action?

#1018, LA Blind mag.
keep an eye out for additional models soon!

Congrats! It looks good. I have three of the sporters (#2980) and I'm sold on B&C quality. Keep up the good work :-)

Quote:

---

Originally Posted by Gunner75

Short is next on the list.....guess we will see.

---

The target/competition stock or grayboe renegade style inlet for SA factory dbm, bottom bolt as well as some stock options already inlet for CDI dbm or whatever savage compatible dbm like you did with the m5 dbm cuts for remington.

Sent from my SM-G928T using Tapatalk

Dang how about a M40 SA for sport weight barrel now that would be nice for the huning crowd

Quote:

---

Originally Posted by Kzink89

any plans on making the savage sporter style dbm in a short action?

---

yes second vote on this

B&C confirmed my order for the M40 stock #1018, I should have it in a couple of day's....Thanks Gunner75