Portable shooting bench

Idea was to make a somewhat portable leveling shooting bench, two 3/4 pieces treated plywood, steel tube legs


http://i243.photobucket.com/albums/f...psd53951ff.jpg

http://i243.photobucket.com/albums/f...psba4c6586.jpg

http://i243.photobucket.com/albums/f...psf07ba275.jpg

http://i243.photobucket.com/albums/f...psb2b4f428.jpg

http://i243.photobucket.com/albums/f...ps2a4e8d1f.jpg

http://i243.photobucket.com/albums/f...ps5071eb7e.jpg

http://i243.photobucket.com/albums/f...ps2b7e6241.jpg

http://i243.photobucket.com/albums/f...ps12b58149.jpg

http://i243.photobucket.com/albums/f...ps103e4f44.jpg

http://i243.photobucket.com/albums/f...ps2040fa43.jpg

Assembly after second coat paint dries. I would construct the top differently on second one and maybe use aluminum tube.

No doubt its going to be sturdy!!! Nice work.

Love the picture of the young one in the background whit his ears covered but seems to be having the time of his life, just like my son would!!!
Good luck with the project!

Quote:

---

Originally Posted by Nandy

Love the picture of the young one in the background whit his ears covered but seems to be having the time of his life, just like my son would!!!
Good luck with the project!

---

I was thinking the same. Made me chuckle.

Definitely looks like something I would have done. Is this a table meant to move around much? how heavy will it be?

The Makita saw is the best for lefty use in my opinion. Looking over the saw as pictured dosent work as well at least for me.
But as for the subject topic, the bench, very nice job. Good welding also.
Do you have any expansion bits for that thing your using? lol

Those are several of my neighbors/craftsmen that have every tool needed for the job except welders, that's the part I hired. The legs/cuffs weigh 55 lb, that's what the shop charged in poundage for steel. The top is aproxamately 2/3's of a 3/4" sheet so it's probably about the same.

The guy with glasses makes his living building chairs and great wheels (spinning) by hand; beginning from rendering the log into billits and his tools are all hand tools. Keeps everthing needed, tools/bits/cutters/etc, in a working collection. He also makes reproduction iron, blacksmithing.

If I make another table, it will be a single piece 1" birch finish grade with adjustable square tube alumimnum legs. That will make it portable to carry and will cut production time: plywood prep/gluing/shaping/banding.

I think the top measures 34" wide X 42" long, the left/right arm rest is 18" wide. It needed a 1/2" treated band glued/stapled to the sides to cover the brittle plywood edges.

Have learned several things about design and construction of this bench that I will refine later. Maybe even offer the leg assembly for sale. Everybody ought to have a saw or a friend with one that can cut out the top. Looked at several really nice benches, like the Stucky's that is well designed/machined/finished. Those aren't overpriced after building this one. If it's done right there is a lot of work in this crude bench. Put the legs on today and will see how it adjusts before week's end.

Will probably use the caldwell matrix rest, the single or double tube lead sleds would allow swing shooting too. My neighbor uses a yoke that is through-drilled but dosen't allow a lot of movement. Hope the table is solid enough to mount most any rest.

http://www.wheeleez.com/

These would make a handy tote for loading range equipment.

Folks use these beach caddies for surf/pier fishing, a fabrication shop down east obx makes one that fits into the tow receiver, my old truck has one back and front for racks/coolers.

My tools are limited by my space. I do a little of stick and gas welding. Love to get me a good tig machine but I cant justify the expense as well as I cant justify a lathe... Dang, me dreaming. Those welds are just beautiful. If you were closer I could had helped you with the welding but just in gasoline/time i am sure the expense is way more than what you paid in the shop. Aluminum, I cant do that one, maybe if I get that Miller Mig machine I have my eyes on.... I love to build things.
What distances will you be shooting on it? I like and have the Caldwell rock deluxe shooting rest in combination with one of their universal rear shooting bags. I like to get their rock BR shooting rest but all I have access to shoot is 200 yds on public fire range in SC so I cant really justify the price either. There is a guy that frequent said range and has the rock br rest and added 3 big bases (about the size of a 2.5 lbs weight plate) and that thing is solid. I got to play with it, fell in love, saw the sticker price, still in love but know is not worth the price unless I start shooting 300 or more.
Im not too fond of sledge type shooting rests. My experience in the past has been that if I used my light guns I cant get it to stay still. Of course, that seems to be a me problem instead of design problem. With separate rest and bags all I do is touch the rear bag and squeeze on it to get it to go to where I want. The 30-06 is the worst gun to shoot since it is so light if I dont hold it the dang thing will jump all over and give me a black eye. The 22-250 dont recoil much and the 7rm is about 14 lbs with a SSS Brux barrel and SSS muzzle break so that one is not going anywhere. I love to shoot with that one, most of the time I can see the deer thru the scope react to get hit by the bullet. Most get knocked down, few stand back up... danged, this was long winded!!! lol! Do you hunt?

PS - at that 200 yds range, we had a few people with jacked up baby strollers rebuilt to haul the guns and accessories from their cars to the firing range... It seemed to work fine for them.

For hunting, and by that i mean long range hunting the rest is as or even more criticle than the bench.
Certainly its important to have a solid rest with adjustment capability. But its also important to be able
to stay on the animal should it run after a shot. And then be ready when it stops for a quick follow up shot.
Those type rests arent available in the market place. They are designed and built by those having the need for them
and modified and improved as experience dictates.

The farm range is 100, 200, 350 with a possible 600 if I cut a couple trees. I hunt out the window/porch because I can see 4 fields while drinking coffee. Haven't used any rest other than the yoke at neighbors and my caldwell bags. I'm a farm shooter, have some long range christmas tree farms to ground hog hunt when deer season is out.

Help me on rests...is the matrix worth $60? There is a 1000 yrd range a few miles up the road and several shooters there machine comp rests for about $300. I'm looking for a rest to take the recoil off my head/neck.

Ahhh, the joy of shooting in a farm. I have seen just a hand full of ground hogs, never in the field. I'm sure that has to be fun!

I am afraid the matrix wont help you taking the recoil off punishing you. Caldwell has the Lead Sled Plus and I seen them and used it in both of the ranges I currently use AND they guys in my hunting lease do have one as well. Bad is the price is just under $100 and I am not sure of the shipping.

http://www.midwayusa.com/product/726...-shooting-rest

That one will take the recoil off you. The more you weight the sledge the less recoil you will feel. At the 200 yd range they have one which looks home build and it has a steel angle up front instead of legs. That steel angle fits in the shooting table (theirs are made of 2x4's) after you remove one 2x4 (almost all tables had one 2x4 loose for this) hence the shooting table absorbs the recoil. These tables are permanent and very beefy. In my opinion, if avoiding the recoil is the main goal the sled plus is worth the money. Your other options are to change the recoil pad. Limbsaver is a great option. I bought a few pads while on discount, I cant remember the brand, for 11 dollars and they were excellent. I have them in my 30-06 which is very light and in the 22-250, both in Boyds featherweight thumbhole stock. These were the grind to fit and the fit is great.
If recoil is not the main concern Im not sure I would spend the money in the matrix just by looking at it. I did some research and the reviews are not the best. If you check the sledge has 4.5 out of 5 reviews in Midway while the matrix has 3. I think that if you are target shooting you will be way better with sandbags in the front and a good rear shooting bag. Hope I am of some help.

Ive never used a lead sled or any similar device. Im sure they work to some degree at least.
Our main interest is a solid rest that will allow for good shot placment. Also be able to follow
a running animal that might also be hit regardless of which direction and how far/fast he runs.
Our serious long range guns are either 30 or 338 cal using heavy bullets over very large powder charges.
Theres no way to completly avoid recoil even with 20# or heavier guns with muzzel brakes.
Weight and muzzel brakes do help however. Id sooner shoot a 20# 338 with a 300 gr bullet than a 10# 30/06
with a 180 gr bullet as far as felt recoil goes.

Been busy farming, getting ready for winter when I start fishing. Put the legs on the table yesterdauy and thought it may not work till remembered to tighten the 5/8" leg bolts. Honestly I think it would hold a compact car and is easily leveled. I'll get some pics this week if weather holds.

Used two bolts per leg cuff, it adjusts with an open end, tilt the side that needs leveling with one hand, cuff drops to the ground/tighten with other hand so one person can move, set-up and adjust. Did not need a shim welded to tube by using two opposed bolt tightners.

http://i243.photobucket.com/albums/f...ps70236ef0.jpg

The leg cuff on the right is about 3" long adjustment for the uneven ground, the rear may need to get longer to adjust for the drop. Cuffs will allow for 6-8" adjustment.

http://i243.photobucket.com/albums/f...ps5431b477.jpg

This is a 350 yrd lane, may be able to see the dark green patch of weeds on a 25' tall log/dirt berm to left of orange leafed tree down past the weed field.

Very nice

Not having a welding setup to build a shooting bench found this in the NRA store http://www.nrastore.com/nrastore/Pro...=SA+24368&ct=e not much more than some have spent on thairs.

Three legs work well. Next bench will be lighter top and a bit different under frame. Labor is the cost in the leg & table fabrication. Raw materials were less than $100. If I had a welder, would make a set up to churn out the parts. There is a community college nearby that has a semister of welding shop access for $120. I can't buy gas and wire for that.

Youve done a very nice job on your bench. Youve no doubt heard it said that the perfect house dosent exist which is no doubt true.
We no sooner move in to our new well planned perfect house before we bigin to see things we wish we did differently.
After building benches for over 40 years i can tell you benches are no different. There is no one size fits all applications.
Take your new bench to a place in N C where you want to hunt but need to carry the bench say 300 yds or more.
And set up on a steep sidehill where you can see across the valley to another. I would reccomend you not be in a big hurry
to build another. If you do you will end up with a garage full of benches. Just like me. lol

Looks great to me. If I ever get my way and move back to the country with a place large enough for me to shoot I will make a more permanent structure, probably move my reloading stuff to it. It would be a small 24/24 feet shed with a lean-to. I will shoot from the lean-to, then move inside to work any tweak in the load. At a minimum I would have some sort of cover and a permanent and very sturdy shooting bench... You are doing great!

Why not just use 1-1/4" black iron or galvanized pipe like everyone else that makes these types of break-down benches? You can get it at most any good hardware store and they'll cut it to length and thread the ends for you while you wait. Get 3 caps for the bottoms so they don't sink into the ground/stuff up with muck and three threaded couplings that get welded to your flat mounting plates.

http://i180.photobucket.com/albums/x...7/DCP_0681.jpg

There used to be a guy that sold just the mounting pads as pictured above so you could supply your own top and legs, but I can't find his webpage or info right now so I don't know if he's still making them or not. Anyone with a chop saw and a stick or mig welder can make a set in less than an hour themselves though.

Here are just a few plans using this leg setup.

http://www.larrywillis.com/shootingbench.html

http://www.gunsamerica.com/blog/diy-...ing-bench-100/

http://www.aeroaces.com/bench1.htm


The other option would be to use a standard threaded pipe floor flange and use a wedge of wood to get the 20-degree leg angle.

http://i56.photobucket.com/albums/g1...ng-bench-9.jpg

I started out with galvo pipe and a 6" X 2" oak wedges, problem was it wasn't adjustable for the uneven ground in this region. I don't like to weld galvo and the materials costs was less for the square tube. Also thought if it needed leg braces, it would be easy to attach them. I'm pleased with how well the legs adjust the table top.

I don't think the legs need two bolts, make the plates smaller and welded to 1 1/2" X 2" triangle frame to elimate through bolting the top, stainless fasteners were $20 that could be replaced with ss pan head screws. All that would cut labor. I have priced aluminum square tube and it's a little more than steel. Six foot of 2" galvo pipe is $75 these days, black pipe and square tubing is about $1/lb.

If I bought square tubing in 20" lengths, it would cut costs.

Nice work! That looks nice and sturdy.

I made a portable shooting bench but I used one of those sawhorses like you have. I laminated three sheets of 1/2" ply for the top but I could have used just two. As you know, the legs of the sawhorses fold up easily. The shooting bags are carried in a 5-gallon bucket which I then use as a seat.

http://i424.photobucket.com/albums/p...ps6af9d00c.jpg

My very best bench as for stability has iorn pipe adjustable legs with attachment plates very similar to Jims.
The top is a double layer of 3/4 plywood. The 4 legs alone which are each 2 peices of pipe due to adjustment
on steep sidehills are no doubt over 50 lbs. Ive found that 3 legs will work better with the single leg in front
as for stability when shooting long distances. The bench i/we use 90% of the time for hunting, is an all aluminum
frame/leg design which can be easily assembled in minits with the 4 legs stored under a single 5/8 plywood top
and weighing about 20# total. It will easily support very heavy guns. Any type of a rest is better than no rest at all.
But its no different than taking your trout rod out fishing for yellowfin tuna, it aint gonna work very well and vice versa.

Speaking of fishing yobuck, how was the mullet run this year.

I dont target mullet but quite a few guys in the area i live do. Many in that area wade and cast net for them.
Ive actually not eaten mullet although im told its very good. I lived in the keys for 10 years and there we used
them as a live tarpon bait. 14 degrees here in N C PA this am and the bear and deer seasons havent started yet
at least for rifle. I didnt go outside today and im beginning to wonder why i keep doing this. lol

I use them for bait, everything in the surf chases them.

So, are we going to see some action on that table or what? lol!

I'll try 200-350yrd targets when the deer hunters get out of the woods. Couple guys are set up on the pastures down range and there's about 6 weeks of gun season, bad news for small game hunters.

Yeah, deer hunters, I seen one or two of that kind... That is the reason I cant shoot at my lease, right after deer season comes small game, then turkey then they are scouting for deer again so there is people there all the time. I could find a couple of weekends out of the year that I could shoot the 300 yards sections but that is not worth the time but just to verify POI.

I don't mind the deer hunters much after about a month, they get their fill and the traffic on the road slacks off. I do think NCWRC treats small game hunters like ******* children.

I have 3 down, donated one to one of my fellow hunter with less luck and an empty freezer, donated one to the "feed the hungry" program and one to one of my best friends that cant get to hunt anymore. Now it is my turn but I have not been able to go for over 3 weeks and now I am on call for 2 weeks so it is not happening. I might end up with an empty freezer myself. Good thing is I dont depend on deer meat for sustenance. I do like deer meat and that will make the rest of the season the most interesting now, If I get to go....
We have quite a few of rabbit hunters in the club, we have squirrels coming off our butt, quail, more and more coyotes (not that we want those), but no groundhogs nor hawgs.... I would like groundhogs just for the target practice and the hawgs for the BACON!!! But you know, we cant have it all.... ha! Crow season starts on Nov 1st so them things better stay up in the trees around the time I pack to leave or they will be my version of groundhogs....

Quote:

---

Originally Posted by Nandy

Love the picture of the young one in the background whit his ears covered but seems to be having the time of his life, just like my son would!!!
Good luck with the project!

---

THIS!!! Lol!!