Tipton or Gunslick ? or any other I'm not aware of.Thank you in advance
Printable View
Tipton or Gunslick ? or any other I'm not aware of.Thank you in advance
Tipton
NO! Even though the carbon or fiberglass rods feel smooth, they are just rough enough to cause damage to the metal.
...and...when/if you break one, hopefully not when you are pushing on the rod - carbon or fiberglass slivers are NOT fun to remove.
Buy a stainless and polish with 800/1000 grit.
Thanks Tom,I've got a stainless steel.....Quote:
Originally Posted by dcloco
Dang it Tom. You really have me thinking what to do.Maybe I should have said that I intend to also get the bore guide system with the rod brand and I use a .17 caliber jag in a .22 caliber so I can double the patch thickness so the jag and cleaning rod has less chance to come in contact with the bore ? I like Butch's triple twill patches but there are quite a difference in quality of different patch brands. There was a time when I used heavy diameter fishing line and threaded through the center of the patch and small knotted behind the patch and pulled the patch through that way instead of using a cleaning rod and never used the same piece of line twice, Mason catfish line was cheap and worked well.... I was thinking any cleaning rod can pick up loose debri and act as a sand paper, the less flexible , the more desirable and one piece so the connecting joints are eliminated from the equation. I use the nylon brush, nylon patch holder if I use one at all with the next size smaller jag....I might need help!:abnormal::crazy::der::tea:
i'm using a Tipton for my .308 !!!
This is what I have USA made to boot.
https://www.deweyrods.com/cart/index...ory&path=59_60
Dean
Quote:
Originally Posted by scope eye
i was going to get a Dewey but found a good price on the Tipton at the time so i went with that instead , The Tipton works very well for me and i like how smooth the ball bearing handle feels when punching the barrel
Thanks Dean. Been lookin for this and the Parker Hale jags.Quote:
Originally Posted by scope eye
I use a combination of Pro Shot SS, Dewey SS/coated and a few old Belding & Mull SS Rods. I don't use the coated Dewey rods with TM bore cleaner, it eats the coating!:mad:
If you break or bend a rod you need to re-evaluate your jag-patch combination. A patch-jag should be pass through a bore with light resistance, it's only job its to remove what the solvent has dissolved. In short solvent eats it, the patch removes it. Also just because the packaging says "X" bore doesn't mean they're right especially when mix and matching brands. For the most part I use Pro Shot patches but I have made jags to fit others and sometimes I'll use a 24 bore jag in a 25 bore. It all depend what fits.Quote:
when/if you break one,
Speaking of solvents, I suggest using Wipe Out and or Gunslick foaming cleaners. Although I use Butch's and TM I find myself using the foaming cleaners in the shop more often now days.
Lucas bore guides are the standard ($$$) although something is generally better than nothing. The bargain basement type MTM guides are pretty much one step below worthless. The term "bore guide" is a bit misleading, its really a rod guide to keep the rod centered going in and out of the throat while the patch keeps it centered in the bore.Quote:
Maybe I should have said that I intend to also get the bore guide system with the rod brand and I use
While were' on the subject of cleaning, anyone know this gadget is used for?
http://i59.tinypic.com/20k3cdw.jpg
I should be used as part of your cleaning regiment along with the bore-chamber.
Bill
Bill my old eyes make it look like a lug recess cleaning attachment but then i am half blind crippled and crazy, just ask my wife.
Earl my friend, you win a cigar. I think I can safely say 75% or more don't what it is let alone having ever used one.Quote:
Originally Posted by earl39
I was considering the purchase of a 40XBR at a show one day at very reasonable price. The seller assured me it was well maintained, but when I stuck my pinky in the lug recess it came out with a glob of black gook hang'n on it. I passed!
Bill
Action cleaning tool kit?
Quote:
Originally Posted by BillPa
A Sinclair lug recess cleaner.......nope ,never seen one of those before but I've got a tipton branded one,it was cheaper than dirt, also was where I got it. Mix kroil half and half with your favorite bore cleaner to remove the stubborn carbon as well.I am probably going with the pro shot stainless steel cleaning stick this time but the tipton is still on my mind to try. One thing I am doing differently this time is going to a 42" length since my other cleaning stick is most likely going to come up short with the new 26" barrel/receiver, bore guide length mix which was my reason for posting this thread. I think Tipton makes a great product at a reasonable price but so does a lot of other companies. One thing with the tipton bore guide, same deal I stated with the cleaning rod length and new longer barrel, it eats up some of your cleaning rod length as well,I'd hate to see someone send a rod down and not clear the end of the barrel so measure before you get started....Thanks to those who contributed to the thread.
Ivan
No cigar for you unless Bill has plenty more to pass out but be sure to check the classifieds, Earl might want to trade his for brass or bullets......Quote:
Originally Posted by Rosco
Maybe half a cigar since the Lug Recess cleaner is part of an Action cleaning kit. :)
Did you tell them that Boots sent you ? :confused:Quote:
Originally Posted by scope eye
somewhere I have a cigar cutter, could make that the barrel nut community cigar cutter ? Thanks for the laugh.Quote:
Originally Posted by Rosco
Its primarily used to clean the locking lug recesses, but can also be used to clean the lug races in the action. If you look close you'll see the felt is square on the ends, that's so it can get into the corners of the lug abutments and recesses.Quote:
Originally Posted by Rosco
Bill
inquiring minds want to know if he gets half a cigar or not ? :biggrin-new:Also thank you for contributing ........
Cigar or no cigar I learned something new today. 😃 so it was a good thread.
[QUOTE=cranebird;273738]inquiring minds want to know if he gets half a cigar or not ? /QUOTE]
Nope, he'll get the whole stogie....it'a be a cheap'n, but a stogie never less. :p
It won't be a fancy Cuban one, but I will take it :cool:
Well I got my cleaning rod and jags today and all I can say is, they are great. I guess Dewey jags are the same as Parker Hale? Anyway they work GREAT! The rod is excellent also!
Tipton. Would not even consider switching. Wipe it after every pass.
.............................The end
I bought a nice Tipton rod and guide kit. Koenig need to find a good jag kit. Any recommendations?
The thing I like these jags is you wrap the patch around it instead of placing the patch over the end of the jag. Works better than I thought it would. No comparison to the other jags!
I bought the 42" pro shot stainless steel micro polished cleaning rod. I like it. Now all I have to do is find the adapter for the 17-20 cal. 5-40 thread to fit the 22 caliber 8-32 thread and to think that I put it up so I knew where it was.......:frusty:
Tipton nickel plated.Quote:
Originally Posted by limige
Just ordered a Tipton rod myself.
Congrats. I would still polish the rod with some 1600 to 2000 grit. FIRST....take the sharp edge off the end of the rod that you attach all of the accessories to. There is a sharp edge....bet on it.Quote:
Originally Posted by cranebird
....and....a couple drops of 100% synthetic oil in the handle - your new cleaning rod will last...literally...a lifetime.