Printable View
Was hoping to get a heavy sporter 260AI from Jim at Apache... Everything I read about his stuff is good.
He said he would like to offer 260AI, but he's not quite ready to invest in the reamers at this point... has some other people asking, but needs a few more "buyers".
I'm hoping some others would like one of his in 260AI and are ready to order so he'll take the plunge.
I'm committing if some others will. :)
Please let him know.
Thanks.
Buy them yourself and charge him royalty every time he uses them :)
that's too funny...but hey, might work. I want one for the next build but it will have to wait 'til someone I don't know dies and leaves me lots of money :)Quote:
Originally Posted by Hotolds442
ROTFL!!!!
I love capitalism!
Capitalism at its finest. Hopefully a few people will commit and he can justify getting the reamer. Jim's work is top notch. My 6WSM barrel Jim built for me is a real shooter. The 450BM is a promising barrel as well and the machine work on both is great. I need to get on the ball and get him rolling on my next special project before you guys get him so swamped that he starts having 12-18 week waiting times. Hmmm if that's the case maybe I need to quit promoting him and start bashing so the wait time will stay low.......
Nah, couldn't do it. Too good of work and too nice a guy. ;)
No kidding! I have my own story that I'll post later that shows just what a top notch guy Jim is.Quote:
Originally Posted by bootsmcguire
Reamers get expensive but it is pat of the job, I currently have 70+ reamers
As goes for any machine tooling!Quote:
Originally Posted by sinman
Exactly, the machine can be the cheap part, maintenance and tooling is the expensive part
I'm working on getting an old monarch lathe and the motor rewind or replacement and the vfd is more money than the machine it self!
What are you looking for in a VFD? I may have something.
7.5 HP with the ability to disable the phase loss protection, 230 volt.Quote:
Originally Posted by Hotolds442
I'll do some looking tonight.
Can't you rent the reamers?
I have seen reamers for rent, but I doubt someone like Apache Gun Works would want to rent something they will eventually buy. From what I understand, Jim started making barrels more or less as a hobby / part-time business and, for a while had rather limited supply of reamers. I guess he does beautiful work with top-end blanks, and also offers a niche market for lower-cost barrels for those wanting to upgrade from factory, but not necessarily go all-out with top-of-the-line blanks, too. The neat thing is, from what I've read, a lot of these less expensive barrels are real shooters! He has not been doing this full-time for very long, and is still acquiring tools. Until the demand is there for a particular barrel, he doesn't want to invest in the reamers. Sounds sensible to me. Check out his web-page, you'll get a better idea of what he's about.
Been perusing Apache's website for a few months now - he'll most likely be my next barrel purchase (Savage or AR-15). And from a long-term business standpoint, I understand why Apache wouldn't want to rent reamers, but I was thinking more about the OP renting the reamers to use on this particular barrel, for which Jim has no reamer at this time. Heck, spin 2 or 3 barrels off while you have them. Win-Win!
Quote:
Originally Posted by foxx
Foxx pretty well nailed it.
As for renting.....I can rent them but it will cost more to do the job then.....plus I DO NOT like rented reamers very much. You don't know the history of the reamer. But I will use them if that is what a customer wants even after I explain my thoughts on the issue . All but three or four of my reamers are all ground to my specs. I'm kind of a stickler when it comes to throat and freebore dimensions.
As for the "rest of the story"......I was seriously injured in a fall out of an attic and crushed my heel bone an fractured the bone just above that in several places. I was an HVAC tech until then.......the fall ended my career as an "attic rat" and I needed something to do. I'm not a set and watch T.V. kind of guy......I would die an early death doing that!!!
As this was my hobby to begin with, I decided to give it a go as a business and it has went exceptionally well thus far. I try my best to do business "old school" and try to build every barrel as though it were my own. The work part is a lot fun and very enjoyable.....but the business side, well, let's just say I've had headaches that were more pleasant! All the government extortion fees are ridiculous! :frusty: :puke:
a 260AI may well be my next build as well....just gotta find an action....hmmmm
Well.......it looks like the demand is there so I went ahead and spec'd out the reamer and ordered it from PT&G. Now the waiting begins. LOL!
Oh SHOOT!!!! How do I explain this one to my wife?
Great, now I need to order another barrel blank!
I can do the work but I can't help with the counseling of the wives and personal obsessions....not that I have any of those problems! :rolleyes:.....(but I do have a few sneaky methods for slipping another barrel/gun into the house unnoticed!) LOL!
Please share, I might need help on this one!
Well....how much time do I have before you get the reamers? Imma have to sell a kid or two, have plenty, two won't be missed, not by me at least...laffin. So what flavor blank can I get without breaking the bank? This build will be intended for a walking hunter, light weight and be able to reach 600yds for 'yotes and p-dogs.
COplains, talk it over with Jim. He's a great guy to deal with. Check and see what options he has for you as far as blanks, but FWIW I have 3 barrels on Green Mountain Barrels blanks that were built by Jim and so far I have shot 2 and both shoot very well. The 6WSM is a consistant 3/4 MOA with any load I have tried so far, and its sub 1/2MOA with the ones it likes.
Green Mtn is cheaper than most and I would say they are equal to or a 1/2 step over ER Shaw IMHO if that helps any. I give it the 1/2 step based off of the lower price.
hmm, this could get interesting, maybe.
A few years back i picked up an old lefty 110 in 25/06 with some kind of after market barrel without a nut, 22".
I actually wanted the vx3 sitting on it more than the gun. It has one of those buttons on the stock for a mag release. Its a very good gun for the ceiling
gun rack in my jeep. But id rather it be a 6.5 and if having a choice a 6.5x06 ackley. I feel the magazine would still work well with that and thats important
for what its used for. So my question to the savage experts is would it work well with a 260 ai cartridge also? Ive already contacted jim about the 6.5x06ai.
I do not know why not. I am planning on putting mine on a long action with the side button mag release for a right-hand 30-06.Quote:
Originally Posted by yobuck
After the order, Dave (Kiff) said it shouldn't take too long for this....he said it would be done before some of my other reamers get done that I've got back ordered......so, I hoping to get a notice that it has been shipped relatively soon. Once it arrives, I'll let y'all know.
Decisions......decisions.....
6.5/06.........260AI..........
you guys are killin me
OK y'all......the 260AI reamer is on the way. I should have it by the end of the week.
What do you charge to ream a 260 chamber to ackley? It's a striker barrel. Thanks!
Sorry, I don't come here as frequently as I use too or I would have answered this sooner.
Clear out your PMs....your box is full....I'll send you a message.
Price depends on a few details. The barrel may need to be set back a little to do this right. It depends on the actual headspace of that barrel.
The great thing about Apache Gun Works is he stops taking orders when he gets behind or knows he will not be able to deliver on the time frame promised to the customer. There are other gunsmiths that do not do this and continue to BS they're customers to keep them at bay. Apache good on you brother for being honest with people and still being able to provide a good product delivered ON TIME. You are a good example of an honest smith that hopefully a few will read about and follow your lead.
I just ordered a barrel. He answered all my e-mail questions in a timely manner. He also directed me to a muzzle brake supplier. Being older I am still not very comfortable doing business with out talking to someone at least at some point. I guess that is just the way it is in today's world. I am over it.