Printable View
All of my Savages have weak ejection and have been that way since day one. All were purchased new. The cases clear the action when the bolt is pulled back but just barely. Sometimes a live round won't completely clear. Can either a longer or stronger ejector spring be had somewhere to make it eject with more force? I know I can get the factory springs from Midway but wasn't sure if they would make any difference since they're probably the same as what's already in there. Thanks for any input.
Gunshack is now selling the SSS Enhanced Ejection kit.
They do work VERY well!
I don't no if you already have the .140 detent ball installed but it might help
Jack
http://www.savageshooters.com/conten...t-Ball-Upgrade
Thanks guys. I'll check that out.
The SSS Enhanced Ejection kit does work very well. I have installed several and I think Savage should use the parts in their manufacturing process.
Dennis
I've had that for a couple a years now. Also the saltpeter they gave us in boot camp, well after all these years it's starting to work! Maybe I'll get one of those kits?
Savage has a new style ejector. The one on the left.Quote:
Originally Posted by efm77
http://i49.tinypic.com/1zppm40.jpg
The follower(tail) does two things. One, helps keep the spring straight and two, prevents over compressing it like the one on the right.The P/N is the same as before.. You can order them directly from Savage. They're not restricted parts. Prices wise, my last order for three each ejectors, springs and extractors was about 30 bucks including shipping and were at my door in three days.
Bill
Bill, does the new style ejector fit all bolts?
Yes. About the only thing I had to do was polish the follower a bit so the spring can move over it freely. A few twists with #320 usually does it.Quote:
Originally Posted by Dennis
Bill
Bill, thanks for the reply. Would you happen to have the part number for these. I have the SSS kits and really like the way they improved the brass ejection.Quote:
Originally Posted by BillPa
I don't know if you have experience with the SSS kits, but I was going to get your opinion between the two setups.
Dennis
A few of mine are pretty new and may already have that new style in them but I haven't taken them apart yet to see. I'll check on it. Thanks for all the info guys.
100129, its the same P/N as the old style. I also suggest ordering and installing new springs(100131).Quote:
Originally Posted by Dennis
From what Joe D. told me while he was there the new style is a running production change. As a matter of fact after talking to him I ordered three sets and in the meantime he sent three sets( ejectors, springs, retaining pins) free :p.
Bill
Thanks Bill,
Dennis
Question... the only SSS improved ejection kit I see @ Gun Shack is listed for .300 Blackout. Are the kits actually caliber/cartridge specific, or not?
Just curious, because I can't seem to get through to SSS again... if someplace else has them in stock and answers the phone, I'm there!
Monte
I am interested in same info
I think its marketed as a 300BLK kit because that cartridge has widely known issues in a Savage chamber, and folks shooting that specific round might be interested in something to fix what ails them.
I ordered mine via email with Lisa, and while even that was a PITA that parts eventually showed up.
I bought 3 and have only stalled one so far, in my long action 223AI and it improved things IMMENSELY.
FWIW, the "Handloading for Competition" book I just picked up talks about how benchresters often remove the ejectors from bolts because they tend to distort cases upon firing...if you're a benchrester that might be a concern, especially if you plan to beef up the spring...
It's an interesting idea that never occurred to me...
Looking at the Gunshack text for the kit, it says "improved extractor". I have three of the kits from SSS, and non contained an extractor. Just the ejector, ejector spring, and detent ball. Is this just bad text on the Gunshack site?
My 20VT still has very very weak ejection even after applying the kit. My brass is formed from Lake City 223. Is there something else I can do to liven up the ejection?
I think so. Thats all the picture on the Gunshack site shows as well.Quote:
Originally Posted by sgt_jamez
FWIW... I called Gunshack day before yesterday, and they said they would get ahold of SSS and find out. Got a message back yesterday that they had called and confirmed that the kits are *not* caliber/cartridge specific. I'm hoping to get a call from SSS today (fingers crossed) and I'll probably order a couple from them as well, just to have on hand.
I've got plans percolating for a short 16.5" suppressed .300 Black Out bolt-gun carbine running 208 Amax suppressed... should be entertaining at the least ;)
Just got off the phone with Lisa from SSS... thought this might be of interest to y'all:
Apparently SSS has an Improved Ejection kit, which has the ejector, ejector spring and larger detent ball - this is about $8 and non-cartridge specific.
Then there is a SSS Improved Extraction and Ejection kit, which includes the above, but also a modified extractor - specifically for 300 Blackout - that runs about $20.
It sounds like the Improved Ejection kit is supposed to work on most larger cases such as .308 Win, 6.5 Creedmoor, etc. but for various reasons is about 50/50 on the Blackout - hence the second kit with the modified extractor.
From what I gathered, the kits @ Gunshack are the Improved Ejection kit, not the Improved Ejection/Extraction (300BO) kit, despite what they have labeled on their product page.
At this point I've got a few of the Improved Ejection kits on order from Gunshack, which should find homes in my 10PC-SR .308 Win (works great usually but occasionally drops a case) and my 12LRP 6.5CM (ejects cases from one batch near 100%, but won't eject cases from a new batch at *ALL*). I've got a project gun that I want to setup with a .223 Rem barrel, a 300BO barrel, and a 6.5CM barrel. The .473 bolt head will get the remaining Improved Ejection kit and the .378 bolt head will get one of the Improved Ejector/Extractor kits, with the other one going in my 12 F/TR .223 Rem.
HTH,
Monte
Check the classified section, FYI
I ordered the SSS "kit" to try and improve a 20 Vartarg that had no eject. The kit was $20 + S&H. Took a month to get here and 15 minutes to install (my first, did it while watching the YouTube video). Very clean extract and eject now. I'm satisfied, though I do like the look of the tail on the new ejector to keep the spring straight. Nice idea.
I know i am ressurecting an old thread but, where can I buy this 300blk extractor kit? I looked on Sharp Shooters Supply amd Gunshacks website and couldnt find anything.
Thanks
Kevin
Call or email Lisa at SSS. I just bought their ejector and extractor upgrade kit. It was I think $23.50 shipped. It may take her a day or 2 to email you back. They don't advertise it on their website but they have them.
I installed it on my rifle and it helped but my ejection isn't 100%.
Howdy from Sacramento area.
Longtime lurker. Great information!
I have a 10fcp-k in .223 that has always had weak ejection.
After reading posts on this forum, I removed the ejector, and sure enough I had the old style, without the little tail extension to keep the spring from deforming.
I have since ordered a new ejector spring (Savage p/n 103611), a new ejector (Savage p/n 100129), and a .140" dia. detent ball for the extractor (on eBay for $2.77 including shipping).
I hope to report back with my findings after installation.
Thanks to all for the great info on this (apparently common) problem and its solutions.
Just replaced the ejector, ejector spring, and added a 9/64" dia. extractor detent ball.
Simple removal and re-install--just looked on YouTube for a bolt head disassembly/reassembly video. You actually don't have to do much taking apart or putting back together-just one pin in the bolt head for the ejector. It was helpful to watch the vids anyway though.
My 10FCP-K is now spitting brass as it should. Thanks to all on this forum for the tips. Very helpful.
Send me a self addressed envelope and I will send them out to 10 people.Pm me for my address.I hope I haven't broken a rule here but I am not selling but giving them away. Mine are 9/64th's which I think is the same. I think they come out to 141 ish.
Got my 300 blk kit in from SS today. New extractor claw and ball detent. Also new ejector spring and pin.
Went from dropping it almost every time to consistently ejecting about 2 ft away. Even slow moving the bolt, it ejected great.
Good to know, I'll need one for my long action 223AI, thanks.Quote:
Originally Posted by BoilerUP
Any left?Quote:
Originally Posted by jonbearman