Eabco accuracy barrel review
I thought I'd try an Eabco barrel in 6BR,, it's an 8 twist throated for 100-107 grain bullets. The barrel is flawless,, looks real sharp and shoots like a laser. It is chrome molly and I did break it in by shooting 1,,clean, shoot 1 clean,, for about 5 rounds before copper stopped. I took it out today and shot 2, 3 shot groups in the .3's same POI and one 3 shot went .9" at 100, but all were different loads.
105 Hornady BTHP B.C. .530
Lapua brass
Federal small rifle primer
29 gr. Varget .010 in lands 1x fired brass is awesome
28.5 gr. Varget .005 off lands in virgin brass is also awesome
28.7 gr. Varget .010 in lands virgin brass shot .9 something
L.E. Wilson neck die
.268 redding neck bushing
L.E. Wilson standard seating die
The dies are fenominall,, able to run these chamber dies with no press at all,, just a plastic hammer for sizing and hand force for seating.
Barrel is mounted to a 110 action
Stock is a bedded BVSS
Rifle basics competition trigger
Single shot follower tray
ejector removed
NXS 8-32 on top
All in all very satisfied for the price $ 259 for barrel,, barrel wrench and cleaning supplies.