Wood is Good Build thread...

Building a shorty hunter...110FP with a 16.5" Heavy barrel in 308, Walnut M40 style stock, CDI DBM, EGW 20MOA rail, SWFA 3x15 scope, Eagle Stock pack

Metal will be OD CeraKote, stock is getting oil finish in Deep Chestnut Brown...test stained a piece tonight...gorgeous...

From the working end...stock is wetted down with water, I'm on 320 grit now...
http://rs1144.pbsrc.com/albums/o496/...92.jpg~320x480

Finished LOP is 12.75" cut 2" off forend as well, wallowed out barrel channel from tiny sporter to heavy varmint...shorty
http://rs1144.pbsrc.com/albums/o496/...9d.jpg~320x480

Lucked out and got a $29.95 stock from Numrich that had a lot of nice figuring in it...
http://rs1144.pbsrc.com/albums/o496/...3d.jpg~320x480

Not bad for a $29 stock is it?
http://i1144.photobucket.com/albums/...ps9aa0553d.jpg

Business end...
http://i1144.photobucket.com/albums/...ps6b15fca1.jpg

Does this barrel make me look short and fat?
http://i1144.photobucket.com/albums/...psd559a549.jpg

Took the block of wood I cut off the stock when I shortened the LOP and squared it up...chucked it onto a lathe and VOILA...Walnut Bolt Handle Knob...had not worked a wood lathe in 35 years or so...amazing how quick it comes back...used a piece of maple to do one practice run...then chucked up the walnut...

http://i1144.photobucket.com/albums/...psf93de028.jpg

great job, a woody Savage

Very nice. Good to see more folks realizing that a 29 1/2' barrel is not necessary.
Love the craftsmanship and creativity on the bolt handle.
Ought to make a darn fine hunting rig.

Man, I LOVE that bolt handle!

Quote:

---

Does this barrel make me look short and fat?

---

Noooo! Compact and robust.

How did you attach the wood bolt knob to the bolt?

It is a beautiful stock. Was the stock inlet for a savage?

Great looking setup,love that stock.How did you attach that bolt knob?

Quote:

---

Originally Posted by Vincenator

Great looking setup,love that stock.How did you attach that bolt knob?

---

Drilled it slightly undersize and then slowly screwed it on a few threads and back off, back on, back off until it pretty much threaded itself...I plan on putting release agent on it and putting some Devcon in to it and letting it cure...it should screw off with the Devcon making pretty good threads...if not...oh well its screwed/glued on...if I ever need to take it off just put it into a vise and squeeze until the wood pops...clean up...

That is one heck of a nice unique build!

OK...a little more work tonight...started out stippling the stock in the grip area and the for end...took my wet hand and gripped the pistol grip...traced a pattern and went at it after I practiced a little on a spare piece of walnut to see how the carbide bit would bite into the wood...once I finished went on to the forend...pretty simple and effective...did not want to checker it so stippling was the next best thing...

http://i1144.photobucket.com/albums/...pscf6c6621.jpg

Then on to the fore end...nothing fancy...plain and simple...

http://i1144.photobucket.com/albums/...psa23bbc84.jpg

In the pic above and this one you can see the GroveTec Flush cups installed...easy button easy...

http://i1144.photobucket.com/albums/...psb5f1d498.jpg

I was on a streak so...why not go ahead and glass bed while I'm at it. so I spent an hour or so taping, filling with plumbers putty and mixing Devcon 10101...didnt know how much...mixed 9OZ only needed about 6...oh well...got enough left over to do another rifle I think...2030 tomorrow night will be 24 hours and I'll pop her out...

http://i1144.photobucket.com/albums/...psdace5321.jpg





.

Once I pop it out I will clean up the stock...oil it and send it off to CDI for bottom metal and inlet...

I will spend my time while its gone applying Alumahyde II in either Coyote or OD Green to all the metal and let it cure a week or two after a 4 hour oven cure...

Scope will be a Nikon Pro Staff 5 4.5 x 18 x 50 with custom turret for the FGMM 175 SMK @ 2600fps on the EGW 20MOA rail with Burris X-Treme Rings...

http://cdn-4.nikon-cdn.com/en_US/o/b...LtWtTDkm5u.png

http://www.google.com/url?sa=i&rct=j...13948375899148

I vote OD green. Think it will complement the wood better. Again, awesome work!

wood is green :)

I AM SO PISSED, DISAPPOINTED, FRUSTRATED and generally beaten down right now I don't know what to do but start over...

http://i1144.photobucket.com/albums/...psacbee782.jpg

I'll ask, what happened?
I realize you may not want to talk about right now so when your ready...

Got distracted...phone rang...no release agent on the barrel, was bedding full length of barrel channel to seal up raw wood....4 layers of tape to give a little room to free float it, didn't apply release agent to tape...that was enough to completely lock it up...action was loose after the first couple pf taps on the screws...barrel refused to budge...live and learn...once I got it apart the tape peeled right out...nice bedding job over all...almost...

Appreciated following your thread! Brought a tear to my eyes! Seriously !!!

That really stinks. You did a really great job on the stock. Do you have a link to where you bought the blank? How many hours did you have into the stock up to bedding?

DAve

Probably had 12-15 hours total...yes I have the part ID'd already...will have another on the way in the am...not giving up...

Even though the stock was damaged in the end it was quite impressive what you did with it. Looking forward to ver 2.0.

Ah, Shi_!

That makes me sick.
Sorry, bud.
Make the next one even better.

Want to salvage the Grove Tec Flush cups...they are epoxied in...any ideas? Heat?

for anyone interested the part number is 1228490A

Quote:

---

Originally Posted by CAPTBEACH

Want to salvage the Grove Tec Flush cups...they are epoxied in...any ideas? Heat?

---

what have you got to lose go for it :)

look at the bright side, you can make more bolt nobs

Quote:

---

Originally Posted by daniel87

look at the bright side, you can make more bolt nobs

---

This is true...

well then how about calling it a practice run.

make a check list and check it twice :)




got any good sources for bedding instructions. looked using the search here

As far as saving your flush cups, I would try heat first. Power sander would be my second choice. Let us know how well the epoxy comes off.

Oh man, I'm working on a wood stock for my deer rifle right now and can only imagine how frustrating that is. It was looking really good too. I love the bolt handle, might have to try and copy you on that. Definitely post version 2 if/when you get to it!

daniel87 you were probably asking the op but this is a really handy bedding article
http://www.accurateshooter.com/techn...illar-bedding/

I have a few questions about the stock blank that you received. Was it a true blank or was it partially finished. Such as action screw holes drilled, recoil lug area and barrel channel milled out or was it more of a true blank?

Semi finished...inlet, recoil lug and barrel channel cut for sporter barrel...I'd say 95%

Heat should work to remove the epoxy. Looking forward to seeing the next version.

Come on Mr. Beach, where's the new version? The practice was looking great and inspired me to get a couple of the Numrich semi-inlet walnut stocks in lefty. I will start those after Deer season ends.

Brandon

Just ordered 2 stocks, thank you for the heads up. Now to borrow a vacuum pump and buy some wood stabilizer...

Vacuum pump?

i want to stabilize the wood in the same manner they do the blanks for laminate stocks.

Quote:

---

Originally Posted by CAPTBEACH

Not bad for a $29 stock is it?
http://i1144.photobucket.com/albums/...ps9aa0553d.jpg

---

Beautiful piece of wood!