Tactical Bolt Handle for B Mag
Quote:
Originally Posted by
n4ue
Seph817, welcome.I have no clearance issues with the bolt handle and the Redfield scope. Yeah, it's close and if you 'try' the handle will touch the scope. But, the stock handle did also!
The scope covers have to be removed before the bolt is opened, or just cock the rifle and the covers will 'self eject'! ha ha
ron
I asked if they would have the B Mag Bolts back in stock, here is the reply from Glades Armory:
Very shortly. I have plenty in stock, the issue is that the
installation requires you to slightly modify the chanel on the stock
where the bolt handle goes through. In essence, the factory handle is a
flat piece of metal. Our handle is done on a lathe from a round bar
stock. When you install our handle and you cock the rifle, the shaft is
a little bit thicker than the factory and it does not let the bolt
rotate completely right (it is missing about 1/16th of an inch turn to
the right). So we are updating our listing as it is very simple to fix,
but you will need to open of the channel slightly with a dremmel so that
the bolt will finish rotating right. Check with us maybe by the end of
tomorrow. We just need to post a video on how to solve the problem.
Regards
Kevin.