Quote:
Of course, if that dont solve the problem tomorrow I will be looking in to relieving the sides and bottom of the lug or ultimately take all bedding out of this choate varmint stock to see how it works back to stock.
Had the Choate varmint stock a couple of years ago and did the same type of bedding that you did and ended up with the same kind of problems....make a long story short I removed the bedding and just skim bedded the v blocks.
Quote:
Figure the stock was meant for the receiver to touch it, even when no bedding was in it, so the bedding is just to make it a smooth, 100% contact, so no shifting takes place. being too thick can be worse than too thin.
+1