-
I re-barreled my 223 FVC with accustock. I replaced the recoil lug with a SS parallel side .187 lug from PTG. The factory lug did not have a flat/parallel spot on it. There was one very small contact mark on the lug and lug slot. The lug is too wide and long, so I had to file off the corners and center to accommodate the rail that runs the length of the stock fore end. The lug now fits the slot like a glove.
-
I ended up buying a lug from midway for 9.99 . my buddy is a smith we are gonna change it Monday . I have filled the right hand bolt slot with jb weld seems to be mint [I followed the tutorial on here and it went well] I cut the new lefthanded bolt slot. cleaned out almost all of the old bedding material with my dermal. sand blasted and primed a 1 coat of paint I will post pics later . thanks for all the help guys . I got to say I am on a couple other forums and this one is by far the best .you guys take care of each other . its great
-
Glad to hear the project is going well, pictures when your finished would be great