I forgot to ask: how is the brake attached? If it's threaded, I have to say it's blended perfectly!
Printable View
I forgot to ask: how is the brake attached? If it's threaded, I have to say it's blended perfectly!
Would a reamer for something like a .45 acp, or modifiy a Colt 45 or 454 Casul by grinding the rim cutting portion of the reamer off. I'm thinking that some ctg. has the dimensions you need even if you mave to do some mods. and watch how deep you cut the chamber. Paul
Do you have access to a caniluring tool? I ask because before Hornady marketed the flex tip bullets I wanted to try handloading them and some heavier ones that they weren't selling. I bought some blackpowder bullet/.50 cal. sabots, took the .45 cal. bullet out, cannilured them, and was shooting 250 and 300 gr. bullets in my 460 pistol before they even marketed the 200 gr. flex tip bullets. If you don't have access to a caniluring tool let me know at my e-mail (I check it regularly) neese.paul@yahoo.com (watch out for the dot in my name) and we'll work out you sending me some and I'll put the canilure anywhere you want it. I don't know about your rifle project but I definately needed it for the pistol. I loaded some 395(?)gr. hard cast lead flat nose for a guy that has a S&W Custom Shop 460 with a long barrel (10" - 12"?). He told me that once he got it zeroed that he was killing deer DRT at 200+ yards. I bet that it did hit like a hammer. Anyway get in touch if I can help. Later Ya'll, Paul