Hodgdon lists Titegroup loads for jacketed 223/55 and 308/168.
Printable View
Hodgdon lists Titegroup loads for jacketed 223/55 and 308/168.
I thought you were shooting a 22-250. So far you have shown no loads for the 22-250. So far everyone has told you it is a no go. You provide evidence for your argument that does not meet any of your criteria. You have made up your mind. Scientific processes have been ruled out. Logic has been ruled out. Brian Litz could not change your mind. Darwin can.
When you figure out what is causing your heavy bolt lift please post it.
Who else do you know who lubes cases to fire in their rifle?
This is for 223 and 308 not 22-250Quote:
??Hodgdon lists Titegroup loads for jacketed 223/55 and 308/168.
The modern cartridge design is engineered for the case to adhere to the walls of the chamber.Quote:
Primer acts as piston, driving case forward. Higher pressure loads, pushes case back around primer. Lower pressure loads, case sticks to chamber wall, doesn't go back, primer protrudes.
2 common fixes, drill out flash hole, bigger, or, lube cases lightly. LOW PRESSURE only. Many/most experienced cast bullet shooters know/do this. I was told about this years ago, by Marlin Bassett, inventor of pillar bedding.
Notice these guys are talking about CAST BULLETS.
Try this. Get a word document opened. type in or copy and past all of the data you are using. Line by line determine if that data uses all three of these criteria.
* 22-250
** Jacketed bullets
*** 7.5 - ? gr. of Tightgroup
Throw everything else away, Or realize that the data you are using is not for your test and that it means nothing, and you are testing blindly.
My mother in law confuses stories and issues. Someone always chimes in" don't confuse her with facts, her mind is made up".
http://massreloading.com/reading_pressure_signs.html
Read hard extraction and flattened primers.
Read the article.
I'm done. I asked a question and ended up in a dispute that I don't understand.
Again, I have Accuracy and MV data in Excel, free for the asking.
joe b.
I believe you are desperately trying to convince yourself that this is a good idea. My understanding of using TG powder is for applications where subsonic or easy shooting is the goal. You are expierencing signs of danger and don’t seem to care. Lubing your brass because it is getting hard to extract is a recipe for death. You want the brass to adhere to the case walls! Otherwise the bolt head and receiver lugs are taking all of the force generated when firing. If you are shooting brass just under your headspace then it slams the brass into the bolt head. IMHO you want to stay away from oil and lube. Also more likely to result in a carbon fouling ring in the bore and potential pressure spikes.
If I didn't care joe I would have walked on by. However you got the same thing on Castboolits.com.
The only load you used 7.5 grains in was a 12" barrel. Every 16 plus barrel got 8.5 grains. It's in you own data.
xxxxx
223 rem and 308 win use FAST rifle powder. They are NOT overbore/major bottle neck case designs. They also have a shallow shoulder angle, Aiding in the flow of pressure. pistol cartidges are FAR more likely to be straight walled, which allows the pressure to work on more bullet surface area compared to case/brass surface area.
Less bottleneck equals faster powder.
I agree oiled cases would put more stress on the action and bolt. This makes me appreciate the cinder block walls between shooting lanes, to bad its not more common.
You are right. I did not see the 26" data. It may be relevant. And just so the forum knows. I am humbled by your research. It is exhaustive. Almost scary the amount of time you must have put in. It would have been easy for you to copy and paste it so I took what I saw and offered it below.
The problem is regardless of how much data you have, in this rifle, the load is flawed. If the PE ramp is making any contact whatsoever, it is not helping. The fact you are using a mallet to open the bolt says the pressure is high. A mallet Joe. Think about that for a moment. You have justified using oil to help case extraction. Think about that for a moment. You think making a larger primer hole is an answer all while potentially making this even more dangerous. You have subscribed to proven faulty pressure sign indicators. You have also subscribed to accuracy and speed has negated the pressure issue. I admire the dedication but warn that sometimes it becomes an obsession.
Now that this horse has been beat to death multiple times how about a different paradigm.
What drives this effort?
What are the goals/purpose?
Is there a specific projectile?
A desired velocity?
A desired terminal performance?
Can another cartridge be used?
---------------------------------------------------------------------------------------------------------------------------------------------------------
ALL 22-250, 100 YARD 5-SHOT GROUPS
ALL WITH WEAVER T36 SCOPE.
8.5 GR. SEEMS TO BE THE MOST ACCURATE TITEGROUP CHARGE.
THESE ARE THE LATEST AND BEST GROUPS.
M11 BARREL CUT TO 16.5”, 12” TWIST? IN STRIKER PISTOL ACTION AND STOCK
5/10/17, 225646M, 8.5 GR. TITEGROUP, 6 GROUPS AVG 1.304”
5/15/17, 225646M, 8.5 GR. TITEGROUP,11 GROUPS AVG 1.350”
5/17/17, 225646M, 8.5 GR. TITEGROUP,13 GROUPS AVG 1.648”
30 GROUPS AVERAGE 1.470”
5/10/17, 40 GR NOSLER VARMAGEDDON, 8.5 TITEGROUP, 5 GROUPS AVG .780”
M11 BARREL CUT TO 16.5”, 12” TWIST?, IN M 10 ACTION AND RIFLE STOCK
5/22/17, 225646M, 8.5 GR. TITEGROUP,5 GROUPS AVG 1.360”
5/31/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.385”
6/22/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.570”
10 GROUPS AVERAGE 1.440”
5/22/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 2 GROUPS AVG .925
5/31/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 5 GROUPS AVG .815”
5/31/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 5 GROUPS AVG .755”
12 GROUPS AVERAGE .808”
M110 BARREL, RECHAMBERED FROM 223 TO 22-250, CUT TO 16.5”, 12”
TWIST?, IN STRIKER PISTOL ACTION AND STOCK
3/20/17, 225646M, 7.5 GR. TITEGROUP, 5 GROUPS AVG 1.310”
3/23/17, 225646M, 75 GR. TITEGROUP, 5 GROUPS AVG 1.450”
3/25/17, 225646M, 7.5 GR. TITEGROUP, 5 GROUPS AVG 1.680”
15 GROUPS AVERAGE 1.480”
3/27/17, 40 GR NOSLER VARMAGEDDON, 7.5 GR. TITEGROUP, 3 GROUPS AVG .867”
BLUE STRIKER BARREL, 14” TWIST?
2/27/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.185”
3/8/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.405”
3/8/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.440”
15 GROUPS AVERAGE 1.343”
4/24/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 3 GROUPS AVG 1.067”
5/1/17, 40 GR NOSLER VARMAGEDDON, 7.5 GR. TITEGROUP, 5 GROUPS AVG .945”
8 GROUPS AVERAGE .991”
SS STRIKER BARREL, 14” TWIST?
3/29/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.531”
3/31/17, 225646M, 8.5 GR. TITEGROUP, 2 GROUPS AVG 1.988”
4/3/17, 225646M, 8.5 GR. TITEGROUP, 4 GROUPS AVG 1.150”
4/3/17, 225646M, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.400”
4/5/17, 225646M, 8.5 GR. TITEGROUP, 6 GROUPS AVG 1.413”
22 GROUPS AVERAGE 1.441”
12/5/16, 40 GR NOSLER VARMAGEDDON, 7.0 GR. TITEGROUP, 3 GROUPS AVG .850”
12/26/16, 40 GR NOSLER VARMAGEDDON, 7.0 GR. TITEGROUP, 4 GROUPS AVG 1.313”
4/7/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 4 GROUPS AVG .894”
11 GROUPS AVERAGE 1.029”
NEW SHILEN BARREL, 9” TWIST? IN SAVAGE 12FV ACTION AND STOCK
I’VE BEEN SHOOTING THIS BARREL SINCE JANUARY 2017; BELOW ARE THE LATEST AND BEST RESULTS SO FAR.
6/15/17, 225646M, 8.5 GR. TITEGROUP, 4 GROUPS AVG 2.438” AFTER 34 FOULING SHOTS
6/15/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 2 GROUPS AVG 1.275” AFTER 54 CAST BULLET SHOTS
6/26/17, 40 GR NOSLER VARMAGEDDON, 8.5 GR. TITEGROUP, 5 GROUPS AVG 1.225”
6/26/17, 50 GR HORNADY V-MAX #2261, 8.5 GR. TITEGROUP, 2 GROUPS AVG 1.150”
6/26/17, 60 GR HORNADY SP #2271, 8.5 GR. TITEGROUP, 2 GROUPS AVG .800”
6/26/17, 68 GR HORNADY BTHP #2261, 8.5 GR. TITEGROUP, 2 GROUPS AVG 1.075”
ALL 40, 50, 60 AND 68 GR BULLETS; NO TIPPING.
THE AVERAGE FOR THE DAY, 55 SHOTS, 11 5-SHOT GROUPS, 4 BULLETS, 1.107”.
AFTER 60 JACKETED SHOTS, THE CLEANED BARREL, SOAKED WITH HOPPES #9 OVERNIGHT, SHOWED NO SIGNS OF BLUE/GREEN COPPER FOULING.
Joe, you never told us if the oil you have been using has gummed up the chamber. Have you tried to clean it if so? What method did you use to clean?
I was changing bbls on M10 and Striker this AM, Striker cases with >.004" excess headspace and bolt Resists at PE, >.005" and a lotta resistance. It's case length/primer protrusion that caused the problem.
Thanks;
joe b.
Was headspace set with a go and no go gauge or were you over sizing the brass? Was the primer protrusion an issue or was it an indicator of the chamber brass length issue? Glad you got it figured out.
Monday I fired 54 total shots; Nosler 40 gr, Titegroup, 100 yards, five 5 shot group averages. 8 gr., .685" avg, 8.5 gr.,.740" avg. So far I've recorded groups totaling 2975 shots, all low velocity, almost all Titegroup, and nary a single occurance of a pressure indication or spike. Imaginary?
How are the 7.5 loads working. That was the powder weight you originally stated that was giving you problems. I have had pressure spikes from low Trailboss loads in the 223.
Have you ever used a pressure trace. They are cheap.
The article I posted higher up states that high pressure does not always manifest itself in the ways you mention. It can't hurt. Read it for edification.