Dr Fonda: I don't have your weapon. Mine is a Savage Mark II BV. I shoot CCI SV in bench match events. The extraction problem you're experiencing is probably not the fault of the weapon - it's the ammo and the subject has been discussed in detail with pictures in another topic, which I can't seem to find now. The bore tolerance on the Savage is tight and couple that with the waxey CCI ammo and the slight case expansion when the round is fired and you get extraction problems. Put a shell between you fingers and you can feel the substance. My solution is to degrease the ammo in a baggy before the match and then place it in another baggy with some Rem Oil. It's a bit of a pain to have to do this but it's more of a pain to deal with stuck cases during the match - or any time for that matter. I also have a bore cleaner brush I've bent at a angle that I use to give the bore a quick douche if the symptoms develop during the match. Keep the bore and the notches next to the bore clean and you should be OK. Additionally, if my finger nail can't loosen the stuck case I use a small pickle fork to extract it. Hope these suggestions work for you.