Nice
Printable View
Nice
Removed
LW this is one of many I have thrown together for myself and my Sons and Grandsons.
http://i613.photobucket.com/albums/t...T/100_0259.jpg
Here is another one I did not do the paint job but did do everything else. Both of them shoot well.
http://i613.photobucket.com/albums/t...T/100_0264.jpg
Not bad at all I decided to permanently bed the recoil lug into the stock tonight. She's all set up to cure overnight now.
Are those both medalist stocks?
Sent from my HTCEVOV4G using Tapatalk 2
Yes - The camo one on my 223 is wearing pretty thin I have had it awhile. I may paint it again or my neighbor does dip jobs that look real good. I want to see if he can do solid colors and he is not too expensive, maybe cheaper than paint.
Not sure why you bother....
You horrible man! I'm lusting after the big heavy barrel over here in NZ and that Choate cheek piece... Just get away from your keyboard...
You wanna swap your barrel for my Pencil barrel?
http://i816.photobucket.com/albums/z...psd0d7fc1d.jpg
http://i44.tinypic.com/w7km5x.jpg
Savage 10 TR/LEO (.308): Accu-Stock/Trigger, 20" threaded bull barrel, AAC 51T Brake, Blackhawk Bipod, 4-12X40 Nikon Prostaff /w BDC, Hogue Sling, and some custom paint to finish it off. Best group I've got was .48" @ 100yds with 175gr SMK's. Time to get some Florida hogs!
All together...
Wearing the Sporter barrel as it shoots pretty good with all the ammo tried.
Model 16 Weather Warrior
Glades Bolt Handle
Dark Eagle Knob
PTG fluted Body
EGW Mount
Leupold Rings MK4 Medium
Sightron 8-32*56
Choate Tactical (Grip is waaay too thick)
Harris Swivel Bi-pod
Gun Works Spikes
DPT Modular End Can
Black Hawk Stock Pad
http://i816.photobucket.com/albums/z...ps5946fae2.jpg
Ammo Tried
Privi 55 gr
Winchester 45gr JHP
Hornady 55 gr Vmax
Federal Blue Box 55 gr SP
Highland 55 gr SP
All grouped under an inch with the Federal and Privi going under half MOA consistently.
Figured it's time to add mine!
Savage 10 in .308
20" Factory Varmint
Weaver 3-15x50
Warne rings
Weaver extended rail
Boyds Thumbhole (Pillar bedded)
CDI DBM
Bolt fluted and Cerakoted by LRI
GG&G Bipod
Accu-shot monopod
Tuned Accu-trigger (Need to get a pull gauge, it's very light)
http://imageshack.us/a/img850/4732/9w6i.jpg
Savage 10 in .223
20" Factory Varmint
Weaver 3-15x50
Warne rings
Weaver extended rail
B&C Carbelite (Pillar bedded, barrel channel opened, barrel floated)
Bolt fluted and Cerakoted by LRI
GG&G Bipod
Tuned Accu-trigger
http://imageshack.us/a/img689/9974/k6p0.jpg
Savage Axis in .308 (Originally 7mm-08)
20" Factory Varmint (Originally 24. Cut, crowned, and fluted by RWS, per original owner)
Weaver 3-15x50
Leupold rings
Warne rail
Boyds Prairie Hunter (Barrel channel opened, barrel floated)
10 round custom Axis mags
Large bolt knob (Will be fluted soon)
GG&G Bipod
Accu-trigger (Crisp, but still working to get it lighter)
http://imageshack.us/a/img32/6458/3ni0.JPG
Stevens 200 in .270 (Originally 25-06)
24" SS Magnum Contour
Leupold 4.5-14 VX-III
Warne rings
Weaver extended rail
B&C Medalist (Aluminum bedding block)
Bipod (Unknown Harris clone)
Standard trigger (work to come)
http://imageshack.us/a/img10/4323/xk9l.jpg
Some nice looking rifles guys.
Here is my Savage Model 12 223AI
26" Lilja barrel 1-14 twist
Rifle Basix 5oz. trigger
Bushnell 4200 Elite Tactical 6-24x50 w/ mildot
http://i1185.photobucket.com/albums/...ps20c74289.jpg
http://i1185.photobucket.com/albums/...psa756a39c.jpg
Custom 6 SLR
Remington 700 trued and squared
Tracker stock
Brux 1.25 dia. no taper 1-8 twist finished at 30"
Rem 40X trigger set at 1oz.
Nightforce rings
Sightron SIII 8-32x56 w/MOA reticle
http://i1185.photobucket.com/albums/...psaa9d15ca.jpg
Remington 6MM
700 action
Shilen 1-10 twist finished at 27.5"
8oz. trigger Choate stock
Sightron SIII 6-24x50 w/MOA reticle
http://i1185.photobucket.com/albums/...ictures201.jpg
The guy I bought mine from is no longer making them. A few others have talked about it, but nothing concrete yet.
They're made from HK G3 mags thst are cut and welded to an Axis mag. Sounds like they take s lot of fine tuning to get them to feed right. Mine work great.
This thread needs more LRPV's!
Not quite a custom but a LRPV nonetheless!!
204 Ruger with Sightron SIII 6-24x50
http://i1185.photobucket.com/albums/...ps6703ae91.jpg
Whoever said that Savage's can't shoot don't know sh*t !!
http://i1185.photobucket.com/albums/...psb19c9b4c.jpg
Savage 116 in 6-284. This one sports a 24" 8 twist 5R rifled Rock Creek threaded nutless and chambered with a custom designed and ground reamer throated specifically for the heavyweight VLD's. Thick lug, forgot who's. 100% titanium FP Speedlock (offered for a very short time by Tubb), 5/8" Stockade BH. Custom BAS. Worked three screw. All set into a McMillan Hunter's EDGE inlet for an aluminum Rem 700 TG. Scoped with a Leupold VX-3 2.5-8x36 in S&K ringmounts.
7# 3.3 ounces as pictured.
IMO the finest lightweight Savage ever built!
http://i869.photobucket.com/albums/a...ps047e4c24.jpg
I'd post a target pic but I haven't fired it yet due to an industrial accident destroying my left cornea. I'll eventually get a cornea transplant and then it's off to the races.
This rifle was built for one purpose however and that wasn't to shoot tiny groups at the range (although it likely will). It was built, like all my builds, to put the first round from a cold barrel exactly where I intended to put it each and every time.
Savage 110BA, Leapold Mark IV scope, Horus inclinometer/cant meter, AWC Thor Titanium Suppressor
http://img.tapatalk.com/d/14/01/05/qugevu8e.jpg
here is my 338 edge on a choate super sniper with a ptg bolt ss custom trigger and a U S Optics T pal 3.2x17 scope its set up on a older long savage action cera coated in sniper grey[IMG]http://i797.photobucket.com/albums/y...ps943f6d22.jpg[/IMG]
Ok, it's back from SSRNZ and its looking more like a Varmint Rifle and it handles so much better.
Started life as a Model 16 Weather Warrior with little pencil barrel that shot really well, but it was 14 Twist so I acquired this barrel off a forum member and waited until the bits came in for the Make Over.
I was having issues with the magazine and feeding, I have not fed rounds through it yet but the mag is slick now in comparison to the original.
http://i816.photobucket.com/albums/z...psea7cd515.jpg
Had the Timney trigger installed, Pillar and Glass Bedded the Boyds Featherweight, Raceway polished,The Bottom metal inletted,SSS Recoil lug and the Barrel threaded for the Greystone Can...
Hoping to nail some critters this weekend!
http://i816.photobucket.com/albums/z...psbb55535a.jpg
"Ghunta" wears Sightron 8-32*56 MOA2, Leupold MKIV Rings, Harris Swivelling Pod with Spikes, EGW 20MOA Mount,PTG Fluted Bolt Body,Atlas Worxs Bottom Metal, Southern Ordnance Bolt handle and Dark Eagle Knob...all sitting in the Boyds Featherweight Thumbhole in Textured Black Paint.
http://i816.photobucket.com/albums/z...pscc154c87.jpg
Very nice!
Nice weapon slimy, good job!
Cheers. Its a nice mix of stock/custom.
Loving the calibre.... Lots of choice.
That's a sharp looking rifle Slimy.
Bugs, what weight bullet you shooting out the 1:14 223AI? My Howas a 1:12, 55Vmax doing OK, got some 50's.
LRPV Re Barreled McGowen 30" in 308. Harris bipod on HS Precision Stock. Sightron 6-24, Farrell 30 MOA Base and Burris Sig Zee Rings.
I'm shooting the 50gr. Nosler BT's. I was still fireforming brass last year. Have enough now to start loading Ackley charges. This gun is capable of busting pdogs at 900 yards. Now I gotta get capable !! lol My longest confirmed kill with it last year was 642 yds.
Here's a pic of my LRPV , originally chambered in 22-250, currently chambered in a 308 30" McGowan. Harris bipod, Farrell 30 moa base, Burris Sig Zee rings and Sightron SIII 6-24x50 Scope.http://img.tapatalk.com/d/14/01/15/e2ezumaj.jpg
I'm liking mine so far:
Savage MK II .22lr
http://i21.photobucket.com/albums/b2...ps24ca1683.jpg
http://i21.photobucket.com/albums/b2...ps2feed8e3.jpg
[QUOTE=3093Andrew;207495]Savage Axis .308
Barska 10-40X50mm Scope
Weaver Scope Rings and Mounts
Blackhawk Sportster Bipod
Blackhawk Sportster Raised Cheek Piece
Custom Paint(did it myself)
Custom 10 Round Mag
ghttp://i1331.photobucket.com/albums/...ps0fe9a125.jpggood looking gun and well done on the paint job. havnt seen a strapon cheek rest before. does it work ok n feel ok?saves buying or modifying the stock ;)
thats mean ;)
FINALLY got the Hog Hunter .223 together the way I like it.
Boyds Thumbhole Stock
Nikon P223 3x9x40 (wasn't sure about it but its really nice)
Weaver Rings
UTG Bipod (swivel and pivot)
Shot VERY tight groups all day long on Saturday.
http://i197.photobucket.com/albums/a...redownload.jpg
Nice stock tomcat. Is that the royal jacaranda or the camo? Hard to tell in the pic, but it looks good.
Royal Jacaranda. First one I have had in this color scheme. I like it a lot.
Savage Axis .308 wth these mods ..
Witt Machine Muzzle Brake
Caldwell 6-9 bipod
EGW scope base
UTG 6-24x50 scope
Boyd's Forest Camo Prairie Hunter stock
http://i114.photobucket.com/albums/n...ps5155b9ab.jpg
Finally I can post mine.
Savage 11 .308 24in barrel
McGowan trued barrel nut
PTG recoil lug
Vortex crossfire 6-24x50
Warne Maxima High rings
Choate Tactical Stock
Kydex Cheek riser
Accumag bottom metal
Accumag 10rnd mag
SSS Competition trigger
Blackhawk 6-9 bi-pod
http://img.tapatalk.com/d/14/02/20/y3a4ymu4.jpg
http://i.imgur.com/5fY0HZd.jpg my girl
It's Alums-Hyde II coyote. It was painted before I got it. I bought the stock used
Been a while since a pic was posted so heres a few.http://i122.photobucket.com/albums/o...psc49f3675.jpg
http://i122.photobucket.com/albums/o...ps03275e64.jpg
http://i122.photobucket.com/albums/o...camosniper.jpg
http://i122.photobucket.com/albums/o...s/100_0601.jpg
I'll add mine HogHunter in 308
Leopold 4x12 rifleman scope (for now)
DNZ one piece mount
Boyd's tacticool stock
http://img.tapatalk.com/d/14/02/25/hupave2e.jpg
looks sharp, Sarge