Re: 223 to 243 question..
Followers are sold seperate. I would buy the other parts for the bigger bolt head so you do not have to change them out, fire pin is good.
http://www.midwayusa.com/viewproduct...tnumber=427817
Re: 223 to 243 question..
Thanks, didn't think to look in the magazine section, figured they should be in Savage Parts area.
I'll get the small parts too, I saw some how-to videos with small parts and springs flying.
Are you 5spd on predatormasters too?
peace.
unloaded
Re: 223 to 243 question..
Quote:
Originally Posted by unloaded
Thanks, didn't think to look in the magazine section, figured they should be in Savage Parts area.
I'll get the small parts too, I saw some how-to videos with small parts and springs flying.
Are you 5spd on predatormasters too?
peace.
unloaded
That would be me there also.
I was doing the same swap as you, but after putting the magazine box & follower on my FP10 SA and testing the .243 case it seemed that my bolt was not coming back for enought to pick up the brass so I put it on the back burner for now. I have not looked into the whys yet as I started another build.
Re: 223 to 243 question..
the 223 head comes with the baffle with the "dogleg" on it. For the 243 you will want to change to a standard baffle with your new bolt head. Otherwise your bolt won't cycle back far enough. Maybe I am stating the obvious here, but rather safe than sorry.
Re: 223 to 243 question..
Thanks for the tip, I haven't seen a baffle change mentioned. I'll add one to my cart.
Re: 223 to 243 question..
You only have to do that when changing from a 223 to a 308 based round. Other way around you don't have to.
Re: 223 to 243 question..
Quote:
Originally Posted by bootsmcguire
the 223 head comes with the baffle with the "dogleg" on it. For the 243 you will want to change to a standard baffle with your new bolt head. Otherwise your bolt won't cycle back far enough. Maybe I am stating the obvious here, but rather safe than sorry.
Ahhh...I knew it had to be something very simple I missed since I did not have a 243/308 style bolt to look at to see the differences. Got one in my order bucket now.....thanks.