What 20moa scope mount for ...

What 20moa scope mount for the Savage 12 F/TR and Bausch and Lomb 4000 Elite 6x24x40?

Do I want a 2 piece or 1 piece base?

Aluminum or Steel?

Any difference between brands?

Thank You

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

i havea bench-source 20 moa i would go with that its a fantastic piece

Quote:

---

Originally Posted by Balljoint

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

---

+1 I have this one too. It is a very good base IMO


Nathan

Ken Farrell are the ones I have on my plans list for when I get to that point.

I think the one piece bases are better but do use the two base weaver type bases on occasion. Your looking at building a competition rifle for F/TR I would go with the one piece.

Quote:

---

Originally Posted by Balljoint

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

---

Thank you, looks like this one is going to be the one Im going to get.

Quote:

---

Originally Posted by Balljoint

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

---

Do you have a picture you can show please? Looking to get a scope mount soon. Wondering if the extra 3" will be too much?

Try this EGW mount http://egw-guns.com/store/index.php?...roducts_id=224

Quote:

---

Originally Posted by Balljoint

Try this EGW mount http://egw-guns.com/store/index.php?...roducts_id=224

---

I was also looking at this:

http://egw-guns.com/store/index.php?...roducts_id=482

same thing my Heavy Duty... but still wondering if 3" is too much on my Savage 12 F/TR.... seeking pictures with my model savage, please.

Noah check your mail