So much has been happening since December, I haven’t been doing much on my Cerekote project. (See this thread: https://www.savageshooters.com/showt...rakote-at-HOME ) But I finally started back with it. I’m posting here since it’s the Action I started with. My little home sand blast set up puts a nice etch on it I think.I don’t have a blast cabinet. I just got a BIG plastic container from Home Depot, and I have a bunch of old mirror glass panels that I used to line & protect the plastic. Really don’t lose all that much media...and whatever goes on the floor, I just sweep up & sift. This was about 80PSI, which is what Cerakote recs. on steel. Still have to do the barrel, B. Nut, recoil lug & bolt sleeve. Luckily, my new Mirage Chassis is in the white and already etched. I’m very happy with this etch using 100grit Aluminum Oxide media.
https://i.ibb.co/XkV4qTj/DC2-E0557-F...60628-F2-D.jpg