FCP 10 - SR Accutrigger help

I managed to crack/break http://www.savageshooters.com/images/icons/icon8.png my Accutrigger on the left side at the thinnest point where the Accu-Release stub passes through the trigger. Based on the info provided here: https://www.savageshooters.com/content.php?274-Factory-AccuTrigger-Part-Numbers , I believe mine to be the 1.5lb Min Trigger Assembly, #105279.

I found a Model 10 SBA accutrigger assembly on fleabay: https://www.ebay.com/itm/Savage-Accutrigger-Factory-Savage-Arms-Model-10-SBA-308-Include-Adjustment-tool/293498624400?hash=item4455e19990:g:Hq8AAOSwz8BeXYL o. Again looking at the accutrigger parts page I suspect this trigger to be of the 2.5 lb. Min Trigger Assembly, #105531, found on the run of the mill rifle packages.

My question is does anyone know if I can swap my 10 FCP springs (and what not) to this 10 SBA trigger assembly and retain the light pull I have now, or will it work at all?

Before other options (Timney, etc..) are suggested, I do actually like the idea of the accutrigger's added safety to prevent bump fires. So for at least the time being, I want to stay with the Accutrigger.

Yes, you can use your springs. Many people already purchase the 1.5lb spring to use. (Very common). The safety blade spring is the same between the two. And it will make for a slightly lighter trigger.