My google foo is extremely weak.
ISO a SA magnum push feed bolt face right handed.
Any help would be appreciated.
Printable View
My google foo is extremely weak.
ISO a SA magnum push feed bolt face right handed.
Any help would be appreciated.
PT&G from Midway?
Currently converting a 7mm-08 to 300WSM. Bolt head looks great and fits good. You will need to move extractor and ejector over to new head.
Make sure to get the 7/16 long bolt head or you will need to modify a component of your firing pin.
For me I just ordered the following...
https://www.midwayusa.com/product/1004714413?pid=861850
https://www.midwayusa.com/product/1005123911?pid=865680
https://www.midwayusa.com/product/1005122611?pid=761587
I only ordered the firing pin because I had a large pin and in my research knew I would need it when going with the PTG. First time doing anything like this, so what do I know.
Start your own thread maybe. Do you have your go no go gauge? Put it together.Quote:
Originally Posted by loveha
I was just stating what I bought, and know nothing of this specific 7/16" bolt head you were mentioning....
My apologies. I misread thisas a hijack.Quote:
First time doing anything like this, so what do I know.
If you measure the length of the lugs on your PTG bolt they are 7/16 or .437 long.
If you go direct to ptg website its cheaper than midway just type it in search