HELP: Trigger binding up in new stock.
I need help as to where to look to try and fix this.
savage 12 4.4 centerfeed. everything fits, front action screw snug-tight, back action screw once it goes past "finger tight" the trigger locks up.
at first it only did it when i tried to assemble with the action and stock facing up.
Re: HELP: Trigger binding up in new stock.
trigger is binding in the stock
remove material where it is touching
Re: HELP: Trigger binding up in new stock.
trigger moves when bolt ISN'T in the action.
Re: HELP: Trigger binding up in new stock.
check to see if the bolt handle has full travel or binding on the stock
Re: HELP: Trigger binding up in new stock.
Trigger is binding on top side front edge of trigger guard trigger opening would be my guess.
Re: HELP: Trigger binding up in new stock.
Re: HELP: Trigger binding up in new stock.
the new "bobby hart" LRT
right now i have it torqued to about 35in lbs. much more past that and the blade and trigger locked TIGHT. I haven't tried anything heavier, but it just shot a couple of 5rd .4 MOA with 69gn black hills. not sure if i should worry about it. :D