I need a 2-piece base for my model 10. It needs to be 20 MOA. Any help would be appreciated.
Printable View
I need a 2-piece base for my model 10. It needs to be 20 MOA. Any help would be appreciated.
2 pc 20 moa? Never seen one. There is a reason they don't make a 2 piece 20 MOA. What are you trying to accomplish ie... why does the one piece not work?
I have a top feed mag and concerned the one pc would get in the way.
You could always get a one piece 20moa and cut the middle section out.
The DNZ is one piece and also available in 20 moa. I love mine. I do have the LOW (no longer in production) and it works great.
What I think Bob meant to say here is that the DNZ GameReaper mount is a 1-piece unit, but it was designed NOT to block the loading/ejection port as the two rings are connected by a narrower piece that runs along the non-port side of the action. Top quality CNC machined aluminum mounts and as Bob noted they're available in 20 MOA. Great option for the blind magazine rifles.
https://msgunowners.s3.amazonaws.com...ac0e9e3a87.JPG
The one piece low profile units ala EGW, Nightforce etc. suck for top loading. The Ken Farrell units work well. I keep coming back to the Farrell, best Picatinny/Weaver one out there.
Farrell makes a nice base, but they're tall and can cause some cheek weld and eye alignment issues.
Here you go. Nightforce 20moa 2 piece base for Sav 10.
http://shop.opticsplanet.com/nightfo..._wwaAg5b8P8HAQ
Here it is cheaper:
https://www.midwayusa.com/product/64...und-rear-matte
Thanks for all the help on this. I found a set of the medium Burris rings and used the +10. That left me around 1/10th of an inch between the scope and barrel.