Printable View
I purchased an Axis in .243 Winchester for my .450 Bushmaster build. All is fine with the rifle and it shoots better than I ever expected. Rounds feed fine from the 243 mag but I don't like all the extra room in the front of the mag allowing the rounds to jump forward under recoil. As I don't own any other Axis rifles, was curious if the 223 has the same dimensions externally. Will it snap in and lock into a 243 stock? If so, will it feed 450 Bushmasters? Anybody done this?
The 223 mag is externally the same as 243. The 223 has a spacer at the back and a shorter follower. That pushes the 223 round forward in the magazine
^^^but the .223 is also narrower in the body of the mag. Lips are also much narrower and tighter.
I've had nothing but trouble trying to get .450 Bushmaster in my Axis. When I'm running the bolt fast, they nosedive and fail to feed. Some people have gotten them to work evidently without any additional work, but I've been doing nothing but additional work and not having any success.
Do you know if there is a mag that you could use with .223 but let you have a longer length to the ogive or coal?Quote:
Originally Posted by foxx
Sent from my XT1575 using Tapatalk
I do not know of any alternatives for the .223.Quote:
Originally Posted by rdhoggattjr
The spacer in the .223 mag is a plastic block held in with a rivet. Drill it out and sand the block down...JB Weld it back in.
Thank youQuote:
Originally Posted by celltech
Sent from my XT1575 using Tapatalk