Printable View
Ok,
First, I have googled and searched here before asking and I think I know the answer but want to be 100 % sure before I move forward.
How do you identify whether or not a bare 110 action is stagger feed or center feed? Or does it even matter. I have an old 110 action pre accutrigger that I want to build up into a dbm rifle using 111 stock parts but not sure if it will work or not.
Pull the action out of the stock, if the magazine is attached to the action it's a staggerfeed, if the mag stays in the stock it's a centerfeed
stagger feed action has grooves in bottom of receiver for the magazine lips to fit in ie.. stagger feed mag is attached to action and center feed is not. I believe there are other differences but that is the easiest to spot.
There will be notches in each end of the cutout for the mag to attach on a staggerfeed, not on a centerfeed
Bare action. No stockQuote:
Originally Posted by keeki
Thank youQuote:
Originally Posted by earl39
Can the action be built either way if it's bare?
I don't see why it couldnt
No, it cannot. A stagger feed can be modified to work with centerfeed blind magazine ( will still need a staggerfeed stock). The underside of the action will need machining, though.
It is almost impossible to find all the parts necessary to make a staggerfeed dbm.
I dont believe you can do anything to make a center feed accept stagger feed mags.
Come to think of it, i have converted a long action centerfeed to accept staggerfeed dbm box once. However, it required machining and, as i said before, the parts for staggerfeed dbm are pretty much unavailable by now. I know because i have been scrounging for them for years.
Glad you rang in then, I really don't have a clue. Never dealt with cf much
The stagger feed actions are fine. You will need to build it as such. When buying a bare action, the one thing you need to be careful of is how it was disassembled. Pull the bolt out and look down the raceway. The lines of the action should be straight. The flats where the bolt slides should not be wavy or twisted even the slightest bit.
Machining means I'm not even going to attempt. The parts were easy to find though. I'll post them for others.
http://uploads.tapatalk-cdn.com/2016...093378b2f5.png
Sorry if I don't understand the last post but I'm going to throw this out there. The Stagger Feed long action will bolt into a Center Feed stock and vice versa. The CF DBM frame will screw to the SF action. In most instances the magazine does not line up without modifications if stocks and or magazines/DBM's are interchanged. Finding parts and assembling a mixture of feed types are two different things. A finished rifle that functions correctly is considered success.
That was more my worry. Looking at the action I'm sure it could be bolted together, but will it function would be the question. Although looking at cdi website, the make one specifically for the SF and of course install it as well. So... looks like I'm going with aics mags... bummer lolQuote:
Originally Posted by Robinhood
Don't forget Pmags. Under $40.00Quote:
Originally Posted by scionxb3003
Yeah those were likely what I would do. Aics style I should have said.Quote:
Originally Posted by Robinhood