I picked up a mag ptg bolt head. The head is shorter than the factory magnum bolt head. Is there a firing pin available for this with the shorter bolt head on the long action bolt?
Printable View
I picked up a mag ptg bolt head. The head is shorter than the factory magnum bolt head. Is there a firing pin available for this with the shorter bolt head on the long action bolt?
You have the wrong bolt head.
Does PTG make the .625 long WSM bolthead?
The bolt head I have is the same length as a standard bolt head. The retaining pin hole is in the correct spot, but the head is too short.
Grouse, PTG does make a bolt head w/.473" face for the longer firing pin. I have one that I purchased from Grizzly, the lugs are longer.