Will the Model 12 Boyds laminated TH varmint stock fit a Target Action? I know its 4.40 and will need to add a pillar when bedding if I want to run the 3rd action screw. I just want to make sure I order correctly. Thanks in advance.
Printable View
Will the Model 12 Boyds laminated TH varmint stock fit a Target Action? I know its 4.40 and will need to add a pillar when bedding if I want to run the 3rd action screw. I just want to make sure I order correctly. Thanks in advance.
Not sure what you're looking to spend, but I have a beautiful 4.4" 3-bolt fully finished and bedded SSS Dog Tracker stock I might be listing. Wait time on these stocks is normally a year or more. I bought it for a build, but decided I might do a Remington build this time around.
Just trying to make sure the model 12 will work.
From what I know a Savage short action stock with the same bolt spacing will work for you. You will probably have to fill the mag opening and install 3 pillars. Make sure the stock is for a blind mag and not a DBM.
any blind mag stock with the 4.40" screw spacing will work for the target action you just dont use the center screw or add a piller for the center one and bed it.
Will work unless you have a dual port target action. It has a different screw spacing.
some of the duel ports are 4.4 as well.