Can the Savage .308 bolt face on a target action be opened up to accommodate the .300 Win Mag? I'd like to use a target action on a .300 Win Mag project. Thanks.
Printable View
Can the Savage .308 bolt face on a target action be opened up to accommodate the .300 Win Mag? I'd like to use a target action on a .300 Win Mag project. Thanks.
Better off to buy a CRF bolt from Midway for $20 than pay a gunsmith the money to do the work.
This is what I did when I built the 338 RUM for my hunting buddy.
http://www.midwayusa.com/Search/Defa..._1-2-4_8-16-32
Wow, I didn't realize those were that cheap! Thanks for the info!
gordon
CRF?
What's he going to use for an ejector?
Well the ejector will be a problem with the CRF head (a standard magnum bolt head would be a much better choice), but so will getting a 300 win mag in a short action. You might be able to feed it in to the chamber but ejecting an unfired (or even maybe fired) case will require removing the bolt.
With a factory modified baffle I am able to eject a fired 378 Weatherby case without issue.
With a bullet intact in the case one does have to remove the bolt to extract a live round.
Neal
No need...extractor does just fine.Quote:
Originally Posted by geargrinder
Extractor just pulls it out of the chamber. Digging a 300win shell out of a short action won't be easy.Quote:
Originally Posted by dcloco
Best to get a push feed magnum bolt head from SSS.