Printable View
I am new to this and am wanting to build a 7mm STW using a factory small shank 7mm rem mag barrel that I have reamed out. I currently have a standard magnum pre accutrigger action but the opening for the mag box is only 3.5" long. What action would I need to get to use cartridges longer than 3.5" and that would take small shank barrels?
Ok that tells me that they make a mag box long enough but the ultra mag box will not fit on the action I have right now as the opening just is not long enough. So what action has a long enough cartridge opening that will take the longer mag box.
The STW, and H&H factory rifles would be a good start.
There are some old 300 RUM and I have an 7 STW action I was lucky to find that will work, but there like hens teeth to locate. Any 375 H&H action will work. Find any of these in a Savage and go to town.
Well sounds like it is just a matter of keeping my eyes open. Thanks for the info.
http://www.gunbroker.com/Auction/Vie...Item=161988283
looks like a small shank. decent price, 2hrs 30 mins to go
That's just too pretty to use for a donor. :-\Quote:
Originally Posted by learjet
I missed it the first time but am watching for a relist. If I get it I promise not to bugger it as it is a beautiful piece!
That's just too pretty to use for a donor. :-\
[/quote]
Really??, the thing just screams .338 EDGE to me ;D
Or you could just open up the action you have to take the longer magazine box, then it would simply involve finding the correct box, follower and baffle.
Bob