Thinking about changing my .308 to a 7WSM or 6.5 SAUM. Recommended? Other than a bolt & barrel change, anything else I need to consider?
Printable View
Thinking about changing my .308 to a 7WSM or 6.5 SAUM. Recommended? Other than a bolt & barrel change, anything else I need to consider?
How about a regular ol 260--should be nothing more than a barrel swap?
Magazine change.
If you want a repeater you will need a WSM mag body and follower. You will either need a Push-feed WSM bolt head and firing pin, or a custom bolt head made. You can take a Magnum head from a long action and have the stem shortened to short action length and then reset your pin protrusion and you are good to go. Get ahold of Jim at Apache Gunworks, I believe he has the reamer for the 6.5 SAUM and can make you a small shank barrel to fit your action. PT&G should be able to make you a bolt head if you don't want to convert one.
Hope that helps.
I already have a .260 or I would. Trying to find a reason to keep the action I have. :)Quote:
Originally Posted by thermaler
It does. Thanks! When you're talking about the "body and follower" you're just talking about the bolt, right? Also, will the action itself be strong enough for a magnum round?Quote:
Originally Posted by bootsmcguire
Thanks! Knew I was forgetting something. :)Quote:
Originally Posted by wbm
I did this for a 300WSM. I did not want a control round feed. Works great!Quote:
You can take a Magnum head from a long action and have the stem shortened to short action length and then reset your pin protrusion and you are good to go.
Nope, the magazine body and follower. Yes your action is plenty strong enough. I have a 6-WSM on a Small/Standard Shank and it works great.Quote:
Originally Posted by Yoshi
Sorry! Had a brain fart. I follow you now.Quote:
Originally Posted by bootsmcguire
So, you just went with a single shot?Quote:
Originally Posted by wbm