Match Sight Mount

I'm setting up my Model 10 for Palma and I'm trying to figure out how to mount a Warner rear match sight. I've got this weaver rail adapter http://www.brownells.com/.aspx/sid=2.../WR_Sight_Base but due to stacking issues, it puts the rear aperture almost 2" above the barrel center line.

Does anyone know of anyone that makes a plate type adapter that bolts to the receiver?

Any assistance would be greatly appreciated.

Try removing the plate from the base on that Lipsky mount and flip it upside down.

I'm looking at my Lipsky mount right now and as said by Dirk loosen the two mount screws(with proper bit) and flip the mount

I did the flip the bracket over trick and while it works, it looks strange.

I might see if I can get a lower profile receiver rail.

Thanks for the suggestions.