Remage/Savington barrel installed
Well I tried and tried to get the Rem barrel off with all the tools, barrel clamp, Action wrench, rosin, torch, finally broke down and had a local smith take it off in 10 mins, threw him a $50 spot (he dropped what he was doing and took care of me). Install was pretty straight forward, I soaked the action in mineral spirits while I ate dinner, drill and 12 ga shotgun brass brush cleaned the loktite stuff off the threads and cleaned up the feed ramp nicely, scrubbed the rest of the action with issue tooth brush. Hit it with carb cleaner and blew out with air, wiped down with clean dry cloth. Installed the barrel with NSS lug and NSS ss nut, used blue locktite as I plan on taking it apart again Sunday after a test box of ammo, will get it CeraKoted next week in Tan or Graphite Black. Used go gauge and tape on the go gauge trick to get head space right. I torqued the nut pretty good, the NSS wrench is a sturdy one, I don't know what the torque spec is but will find out when I do post coating assembly. to align the lug I got the alignment tool from ebay instead of cutting the receiver, it did not fit perfect on the lug but was close enough to hold it in place. I have another 300 win mag on order from Jim for one of my Savages. Jim at NSS is a great guy, patient, easy to deal with , makes sure you are not too stupid to install the barrel before he sells you one. Great guy. Here are some pics. Well I cant figure out how to do pics, sorry, you have to trust me that it looks kickass.